Panasonic HX-DC3 Specify the starting position for the scene, Operations Play back, Pause

3 Specify the starting position for the scene.

≥Play back to near the position where you

wish the scene to start, then pause playback and specify the starting position

precisely using Frame-by-Frame

Playback. The pause position will be the starting position of the scene.

≥If you wish the split scene to start from the beginning of the scene, go to Step 4.

Operations

Play back	With the unit paused, tilt the SET button to the
	right for approximately 2 seconds to play back
	normally, and to the left to play back in the
	reverse direction.
Pause	During playback, press the SET button.
Fast forward/	During playback, you can change the playback
fast-rewind	speed by tilting the SET button right or left.
Frame-by-frame	With the unit paused, tilt the SET button to the
	right to advance frame-by-frame, and to the left
	to reverse frame-by-frame.

4 Tilt the SET button up.

≥The screen for specifying the end position of the scene appears.

5 Specify the end position for the scene.

≥Set the end position by performing the same operations as when setting the start position.

≥The portions displayed in green are saved.

≥If you wish to splice a preceding section to

a subsequent section, tilt the SET button down. Each downward tilt of the SET button changes the section to be deleted.

6Press the button or the recording start/stop button.

- 97 -