Panasonic SDR-S7P/PC Setup 6 Setting the date and time, Set to or Select the desired menu

Setup 6 Setting the date and time

Setting the date and time

Before recording, check that the date and time have been set.

The very first time that power is turned ON, a message appears prompting you to set the date and time. Select [YES], press the center of the cursor buttons and proceed to step 3 .

1

2

3

To change the date and time display

●To change an item

→[SETUP]→

[DATE/TIME]

[OFF] : Date and time are not displayed.

[D/T] : Date and time are displayed.

[DATE] : Only the date is displayed.

Set to [] or [].

Select the desired menu.

→[BASIC]→ [CLOCK SET]→[YES]

Set the date and time.

To select settings	To change
	numerical values

The year is displayed up to 2099 and the 12-hour system is used to display the time.

●To change the date format

→[SETUP]→

[DATE FORMAT]

Format	Appearance on
indication	LCD monitor
[Y/M/D]	2008.DEC.15
[M/D/Y]	DEC.15.2008
[D/M/Y]	15.DEC.2008

4 Enter the date and time.

•The clock function starts at [00] seconds.

•After pressing the [MENU] button and closing the menu, check the date and time displays.

28 VQT1R00