Recording | 2 |
|
Recording | Recording motion pictures |
[HDD] [SD]
≥Open the lens cover before turning the unit on.
1 Rotate the mode dial to select 
and open the LCD monitor.
2 Select the recording destination by the menu. (l 19)
[MEDIA SELECT] # [HDD] or [SD CARD]
3 Press the recording start/stop button to start recording.
To end the recording
Press the recording start/stop button again.
≥[¥] and [;] are red during recording. Do not move this unit until [;] is green.
≥The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.
The scene is automatically divided when the recorded data exceeds 3.9 GB. (The recording will continue.)
≥When about 5 minutes have passed without any operation in recording pause, the unit automatically turns off to save battery life. To use the unit, turn it on again.
This economy feature can also be set to [OFF].
∫Screen indications
SP 0h00m10s R 12h45m
ARecording mode
BSelected recording destination C Remaining time left for recording
When the remaining time is less than
1minute, [R 0h00m] flashes red.
D Recording time elapsed
Each time the unit enters the recording pause mode, the counter display will be reset to “0h00m00s”.
≥While motion picture recording is in progress, the recording will not stop even if the LCD monitor is closed.
≥Do not disconnect the AC adaptor or remove the battery if the unit is in recording mode. This may cause a repair message to appear when powered up again.
22
LSQT1467 (ENG)