If the Wi-Fi connection cannot be established
Problem | Check points |
It cannot connect | (General) |
to the wireless | ≥ Turn ON the wireless access point. |
access point. | ≥ Approach the wireless access point and reconnect. |
The wireless | ≥ If it takes time to complete the connection, the |
aborted. | |
access point is not | Reset the connection settings. |
detected. | ≥ Check how to connect to the wireless access point and how to set the |
| security settings. |
| ≥ Make sure the wireless access point is registered in this unit. |
| ≥ The device may be unable to locate the wireless access point due to |
| problems with the signal. Use [Manual Setting]. |
([WPS Connection])
≥ Make sure the wireless access point is in the correct WPS standby mode.
≥ Make sure the PIN code has been correctly input.
| ([Search for wireless network] or [Manual Setting]) |
| ≥ Make sure the SSID and Password have been correctly input. |
| ≥ Check the Authentication method, Encryption type, and Encryption |
| key (Password). |
| |
Radio waves of the ≥ The condition may improved by moving the location or changing the | |
wireless access | angle of the wireless access point. |
point get | ≥ If you use another 2.4 GHz band device such as a microwave oven or |
disconnected. | cordless telephone nearby, you may interrupt the signal. Keep a |
| sufficient distance from these types of devices. |
25
(ENG) SQT0003