Copy/Dubbing
Dubbing images onto other video devices
You can dub by connecting an AV cable.
≥Images are dubbed in standard quality.
≥Use the AC adaptor to free you from worrying about the battery running down.
A/V
≥ Change the mode to .
Change the video input on the video device and TV that this unit is connected to.
≥The channel set will differ depending on the terminal to which the unit is connected.
≥ See the operating instructions of the video device for details.
≥ Insert the plugs as far as they will go.
≥Do not use any other AV cables except the supplied one.
AAV cable (supplied)
1 Connect this unit to a video device and start playback on this unit.
2
≥To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥If the date and time display and function indication are not wanted, cancel them before dubbing. (l41, 74)
≥Turn off the operation icon by pressing the ENTER button when dubbing (l38).
If the dubbed images are played back on a
In this case, refer to the operating instruction of the device you are connecting to or read the operating instructions of the
79