Panasonic VDR-M70PP, VDR-M50PP 161, When the DVD Video Camera is connected to PC

When the DVD Video Camera is connected to PC:

Symptom				Cause and Correction	Reference
					page
No drive icon appears on	The DVD Video Camera is not turned on.				50
PC.	Check the power supply.
	Driver is not properly recognized.				
	Turn PC off and on again. If the drive icon still does not appear, use
	“Refresh driver” in Device Manager to reinstall the driver.
	Turn PC off and then disconnect the USB cable. Turn PC on again,				
	and then use the USB cable to connect the DVD Video Camera to
	PC.
	Make sure the USB cable is completely plugged into this DVD Video				
	Camera.
	If a yellow “!” mark is attached to some device in Windows® Device				
	Manager, uninstall the USB device driver, and then reinstall it,
	following the procedure on page 133.
Error occurs in playback	If error occurs with USB connection, the transfer rate is not sufficient.
of DVD Video Camera on	It is recommended that you use a USB terminal conforming to				148
PC.	USB2.0 when connecting the DVD Video Camera.
Application is	Turn the PC and DVD Video Camera off, and try again.				
abnormally run on PC.
Error occurs during	The temperature of DVD Video Camera is too high due to continuous
writing to DVD-R disc.	operation.				
	Disconnect the DVD Video Camera from PC once, remove the disc
	from the DVD Video Camera, and then turn it off. After a few
	moments, connect them again and write to a brand-new disc.
Transfer of images stops.	Connect the DVD Video Camera to another USB terminal of PC. If				
	your PC is a desktop type, it is recommended that you use USB
	terminal on the back of PC.
DVD-RAM/R/RW drive	This problem may be solved if the software related to DVD-RAM/R/
built into PC cannot be	RW of your PC is upgraded, or if the DVD-RAM driver is uninstalled.
used after the provided	However, with Windows® 98 Second Edition / Me / 2000				
software has been	Professional, uninstalling the DVD-RAM driver will make it
installed.	impossible for the JPEG stills recorded on DVD-RAM on this DVD
	Video Camera to be read by the PC.
DVD-R disc cannot be	DVD-MovieAlbumSE does not support playback or data read on
played back on DVD-	DVD-R disc: Use optional-user provided DVD video playback				138
MovieAlbumSE.	software to play back DVD-R disc on PC.
Error appears when	Make sure that your PC display adapter (video card) conforms to				
starting DVD-	DirectX 8.1.
MovieAlbumSE.
Video written to hard disk	DVD-MovieAlbumSE cannot edit DVD-VR data stored on hard disk
of PC cannot be edited	of PC: Copy the data to another DVD-RAM disc and then edit it.				
on DVD-MovieAlbum
copy tool.
Movies are not	Make sure the power switch of this DVD Video Camera is set to				
recognized by	“	”, “	” or “	”.
application in PC.
The DISC EJECT lever	While the DVD Video Camera is connected to PC, use Explorer to
does not work when the	right-click the DVD Video Camera drive icon and execute “Eject”.				
DVD Video Camera is
connected to PC.

161