Panasonic AG-DVC7 manual $ Recording Lamp Tally Lamp, $ To Pause the Recording

Page 6

Camera Mode

Recording

When recording with the [AUTO/MANUAL/PROG.AE] Switch ? set to [AUTO], the Camera Recorder automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (-27-,-29-)

AUTO

?MANUAL PROG. AE

1Set the [OFF/ON] Switch b to [ON].

OThe [CAMERA] Lamp ` lights up.

` CAMERA VCR

OFF ON

b

2 Press the Recording Start/Stop Button a (or Sub Recording Start/Stop Button R).

ORecording starts.

OAfter the [RECORD] is displayed, it changes to [REC].

R

a

REC

RECORD

$ Recording Lamp (Tally Lamp)

The Recording Lamp 2 lights up during recording and alerts those being recorded that recording is in progress.

2

OThe Recording Lamp does not light up if the [REC LAMP] on the [OTHER FUNCTIONS] Sub-Menu is set to [OFF].

$ To Pause the Recording

Press the Recording Start/Stop Button a (or R) again.

The [PAUSE] Indication is displayed.

PAUSE

PAUSE

OIf the Recording Pause Mode continues for more than 5 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn off, then turn on the power again.

$ To Check the Recording

By pressing the Recording Check Button [ ] D briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene.

DSEARCH

OThe [CHK] Indication is displayed. After checking, the Camera Recorder resumes the Recording Pause Mode.

$ To View the Recorded Scene while the

Recording is Paused (Camera Search)

The recorded scene can be viewed by keep pressing the [SEARCH –] Button D or [SEARCH +] Button G in the Recording Pause Mode.

DSEARCH

GSEARCH

OWhen the [SEARCH –] Button is pressed, images are played back in the reverse direction.

OWhen the [SEARCH +] Button is pressed, images are played back in the forward direction.

20

Image 6

Contents AG-DVC7 Using the Menu Screen List of MenusTo Exit the Menu Screen 12bit Audio Audio Recording Mode Setting Date and Time Internal Lithium Battery RechargeLP Mode Before UseLow-Angle Recording Holding the Camera Recorder for RecordingNormal Recording Recording from a high position$ To Pause the Recording Recording$ Recording Lamp Tally Lamp $ To Check the Recording$ Recording Yourself $ To Finish the Recording$ Digital Still Picture Press the Photo Shot Button M in the Recording Pause ModePhotoshot $ Progressive PhotoshotDigital Zoom Function To Cancel the Digital Zoom FunctionZoom In/Out Functions $ To Take Close-up Shots of Small SubjectsTo Cancel Image Stabilizer Image Stabilizer FunctionFade In/Out Functions Backlight Compensation Function Wind Noise Reduction FunctionCinema Function Recording in Special Situations To Cancel the Program AE FunctionTo Resume Automatic Adjustment Recording in Natural ColorsAdjusting White Balance Manually $ About White Balance SensorTurn the Push Dial until the Indication is displayed It is useful for recording fast-moving subjects Manual Shutter Speed AdjustmentManual Iris Adjustment Press the Push Dial until the Iris Indication appearsPicture Effect Functions Manual Focus AdjustmentTo Cancel the Picture Effect Picture Effects With PIC.E. ButtonMix Mode $ Wipe Mode and Mix ModeWipe Mode Picture Effects From P.EFFECT MenuAdjusting the Microphone Sensitivity Level Set Camera Functions Recording Setup MIC Level ADJ. YESPress the Push Dial to select the MNL AGC*, NO-AGC $ Adjusting the Sound Volume Playing BackTo Stop Playback $ Cue/Review Playback Finding a Scene You Want to Play BackSlow Motion Playback $ Variable Speed Search FunctionStill Playback/Still Advance Playback Finding the End of Recording$ Jog Playback $ Scene Index Search Index Search Functions$ Photoshot Index Search Continuous Index SearchPlayback Digital Effect Functions To Cancel the Digital EffectPlayback Zoom Function To Change the Enlarging Area of an ImageVideo Press the OSD Button e on the Remote ControllerPlaying Back on Your TV To Make the Indications Appear on the TV ScreenAudio Dubbing $ To Adjust the Audio LevelTo Cancel Audio Dubbing To Play Back the Sound Recorded by 12bit Audio Dubbing