AXIS Q1602 Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
•Applications — use installed applications to trigger the rule, see Applications, on page 29.
•Detectors
-Audio Detection — trigger the rule when audio is detected, see Audio Detection, on page 28.
-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 26.
-Tampering — trigger the rule when tampering is detected, see Camera Tampering, on page 26.
•Hardware
-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.
•Input Signal
-Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see I/O Ports, on page 42.
-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 10. This can for example be used to validate actions during product installation and configuration.
•Storage
-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.
-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
-Locked — trigger the rule if the storage device is locked (write protected).
•System
-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
•Time
-Recurrence — trigger the rule periodically, see Recurrences, on page 32. This can for example be used to upload an image every 5 minutes.
-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 32.
Available actions include:
•Day/Night Vision Mode — set day mode (IR cut filter on) or night mode (IR cut filter off).
•Output Port — activate an I/O port to control an external device.
•Play Audio Clip — see Audio Clips, on page 21.
•Record Video — record video to a selected storage.
•Send Images — send images to a recipient.
30