Axis Communications P1425LE NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 45

AXIS P1425–LE Network Camera

System Options

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS on page 40.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

Note

For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnPTM. Note that UPnPTM must be enabled in the product (see System Options > Network > UPnP).

45

Image 45
Contents Axis P1425-LE Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P1425-LE Network Camera Table of ContentsPerformance Considerations Network Connector Connectors and ButtonsConnector Hardware OverviewSD Card Slot LED IndicatorsControl Button Color IndicationAccess from a Browser Accessing the ProductAccess from the Internet Set the Root PasswordLive View Set Power Line FrequencyControls on the Live View Click Use HttpsGo to Setup Events Axis Media Control viewer toolbarManual Trigger PTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream Axis P1425-LE Network Camera Basic Setup Setting Up the ProductVideo Stream VideoPixel Counter Image264 Stream ProfilesExposure Settings Camera SettingsImage Appearance White BalanceIris adjustment Built-in IR Illuminations LEDsDay/Night View Area Select an Aspect ratio and a Video stream resolutionOverlay Go to Video View AreaUsing Overlay Text in an Action Rule Overlay ImageGo to Video Overlay Image Focus & Zoom Privacy MaskGo to Events Action Rules Go to Video Focus & ZoomAxis P1425-LE Network Camera Default Viewer for Browsers Live View ConfigViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigLight Buttons Output ButtonsGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Control QueueControls Camera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P1425-LE Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P1425-LE Network Camera Events Time Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddFallback Action RecipientsRecipient Use with action Go to Events Recipients and click AddSchedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddAxis P1425-LE Network Camera Recording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Maintenance Ports & DevicesSupport Logs & Reports System OverviewScripting File UploadPlain Config Reset to Factory Default SettingsEmergency Recovery Procedure TroubleshootingChecking the Firmware Upgrading the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesStorage disruption Storage and disk management problemsTechnical Specifications Power Function/group Specifications System ApplicationConnectors DimensionsConnectors Performance Considerations M1.3