Bosch Appliances installation instructions Unpacking, EX27/EX27N/EX27D camera assembly

Page 8

2. UNPACKING

Care should be taken when unpacking. Check the parts list and confirm all items have been located. Inspect the equipment thoroughly to ensure nothing was damaged in transit.

Contact a Bosch Service Center if a problem is noted, see the rear page of this booklet for contact numbers.

PARTS LIST (items supplied with unit)

-EX27/EX27N/EX27D camera assembly

-Installation Instructions

-Universal type pan/tilt mounting bracket with

¼- 20 captive nut

-3mm Allen key

ITEMS REQUIRED FOR INSTALLATION (not supplied with unit)

-Hardware for camera mounting (bolts, etc.)

-Mounting tools and wrenches

-Optional mounting brackets (contact Bosch for details and prices)

8

Image 8
Contents EX27/EX27N/EX27D Important Safety Instructions Page 89/336/EEC Electromagnetic Compatibility Directive Page Index EX27/27N/EX27D Description EX27/EX27N/EX27D camera assembly UnpackingEX27/EX27N Mechanical Specifications EX27D Mechanical Specifications Initial Preparations Following installation guidelines must be followed GuidelinesVoltage Input 12VDC or 24VAC Electrically Isolated BoardCamera and Lens Access Remove the four cap screws with a 3mm Allen key. See -1onRear Housing Removal Camera and Lens Access Photocell Adjustments EX27/EX27D Day/Night Switch Adjustment Lens Adjustments EX27 Vari-focal Lens Focus AdjustmentPage OSD Menu System Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Troubleshooting Guide Problem Possible Likely Cause SolutionNo Video cont’d Poor Picture Quality Poor Picture Quality General Specifications Subject to Change Without NoticePage Page Page