Axis Communications Camera Station manual Monitor, Playback

Page 22	AXIS Camera Station Installation Guide
Monitor	When clicking this button, the I/O Status of
I/O	I/Os defined in AXIS Camera Station are
	displayed. Monitoring I/O defines when
	events, such as an alarm or motion detection,
	should be triggered. Each I/O is shown on one
	line, along with a colored indicator:
	• green indicator means the I/O is in its normal
	state
	• red indicates that the I/O is active, record-
	ing may be in progress depending on the
	setup.
	• yellow means there is no communication
	with the I/O
	Buttons for starting and stopping an I/O
	output are shown, as well as a button to open
	the camera’s view.
	See AXIS Camera Station User’s Manual for
	instructions on defining I/O.
Camera sequence	Click to open the Camera sequence window. A
	camera sequence is a pre-defined "tour" i.e. a
	configuration that automatically switches
	through all of the cameras included in the
	tour. Select the camera sequence to view from
	the drop-down list. See the User’s Manual for
	instructions on setting up a Camera Sequence.
Playback	Here you can search through recorded events.
Recorded events	Select a date, a time and press the search
	button to get an overview of all the recorded
	events. Click on a reference image to open a
	Playback window to view the entire recording
	of the event.