Bosch Appliances WZ45N instruction manual Troubleshooting

Page 5

TROUBLESHOOTING

Before sending the camera out for repair, check the items below. If the problem persists after checking these items, contact your service center.

If no image appears.

Is the coaxial cable attached securely? Are the power and voltage normal?

Has the exposure/iris of the camera been adjusted correctly (within the OSD menu) ? Is there adequate illumination?

If the image is unclear

Is the lens in focus? Is the lens dirty?

Dirt of fingerprints on the lens can adversely affect the images. Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper and cleaning fluid (commercially available).

Is the monitor adjusted correctly?

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Image 5
Contents WZ45N Integrated Day/Night IR Dome Important Safety Instructions FCC Note CE Note Precautions Troubleshooting Customer Support and Service Dimensions mm UTP Output Installation UTP Output Installation Connections and Camera Settings Lens Adjustments Menu Camera OperationAccessibility Exposure Lens Exposure E.SHUTTER Camera Operation Color White Balance Control Camera Operation DAY & Night Auto / Color / B/W Color Gain ControlFunction Sharpness Function MirrorFunction SLC Side Light Compensation Function GammaCamera Operation Motion Detection Camera Operation Camera Operation Privacy Privacy Masking Zone Privacy Color SET SET UP Camera IDSET UP Title Display Camera Operation SET UP PC SET UP LanguageExit Specifications USA