Bosch Appliances WZ18 installation manual Important Safety Instructions

Integrated IR Bullet Camera Safety en 7

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1.3Important Safety Instructions

CAUTION!

1.A regulated DC12V 1A power supply is recommended for use with this camera for the best picture and the most stable operation. An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty will be out of subject.

2.It is recommended that the camera is used with a monitor that has a CCTV quality 75 Ohm video impedance level. If your monitor is switched to high impedance then please adjust accordingly.

3.Do not attempt to disassemble the camera to gain access to the internal compounds. Refer servicing to your dealer.

4.Never face the camera towards the sun or any bright or reflective light, which may cause smear on the picture and possible damage to the CCD.

5.Do not remove the serial sticker for the warranty service.

All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit.

Camera grounding - For mounting the camera in potentially damp environments, ensure to ground the system using the ground connection of the power supply connector (see section: Connecting external power supply).

Bosch Security Systems, Inc. Installation Manual 1.0 2011.01