Panasonic WV-NP472 Setting Procedures, Camera Identification Camera ID Setting

SETTING PROCEDURES

The following pages describe setting operations from the camera.

For accessing from the PC, interpret these instructions as follows.

Function	From the Camera		From the PC
Opening the camera setup menu	Hold down the I button for 2 seconds.	Click the Camera Setup button in the
		main page to display the menu control
		buttons.
		Click the Menu ON button.
Closing the camera setup menu	Press the I button while the cursor is at	Click the Menu OFF button.
	END.
Opening a more detailed setup	Press the I button while the cursor is at	Click the ENTER button while the cursor
menu	an item tailed with O mark.	is at the item tailed with O mark.
Returning to the previous menu	Press the I button while the cursor is at	Click the ENTER button while the cursor
	RET.	is at RET.
Opening the special menu	Hold down the L and M buttons simul-	Click the Reset/Special button while the
	taneously while the cursor is at RET in	cursor is at RET in CAM SETUP.
	CAM SETUP.
Resetting the parameter of an item	Hold down the L and M buttons simul-	Click the Reset/Special button while the
	taneously while the cursor is at the item.	cursor is at the item.
Resetting all the settings	Hold down the L and M buttons simul-	Click the All Reset button while the cur-
	taneously while the cursor is at CAMERA	sor is at CAMERA RESET.
	RESET.
Selecting an item	Press J or K.	Click the ↑	or ↓	button.
Selecting a parameter	Press L and M.	Click the ←	or →	button.
Validating the selection	Press I.	Click the ENTER button.
Escaping from the VMD mask setup	Hold down the I button for 2 seconds.	Click the ESC button.
etc.

SETUP SELECTION

** SET UP **

CAMERA↵
NETWORK↵
END	SET UP DISABLE

CAMERA SETUP MENU

** CAM SET UP **

CAMERA ID	OFF	↵
ALC/ELC	ALC	↵
SHUTTER	---
AGC	ON(DNR-H)
SENS UP	OFF
SYNC	INT
WHITE BAL	ATW1 ↵
MOTION DET	OFF
LENS DRIVE	DC
CLOCK	OFF
RET

1.Move the cursor to CAMERA or NETWORK, and press I to open the desired setup menu. CAMERAN: Opens the CAMERA SETUP menu. NETWORKN: Opens the NETWORK SETUP menu.

2.Move the cursor to END, and press I to return to camera image screen.

Note: When SETUP DISABLE appears in the bot- tom line you cannot change the currently active settings. This disablement is designed to prevent accidental setting change. Refer to the previous page to change it to ENABLE.

1. Camera Identification (CAMERA ID) Setting

You can assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on and off on the monitor screen.

Character Cursor

		0	123456789
			ABCDEFGHIJKLM	Character
		NOPQRSTUVWXYZ
().,'":;&#!?=				Area
+-*/%$
	SPACE			Command
	POSI RET END RESET
................				Editing
				Area
Cursor

CAMERA ID menu

-16-