Panasonic WV-NP304 manual Installation, Attach a safety wire

Installation

Attach a safety wire

The following is a safety wire attachment example. Procure an appropriate safety wire kit according to the installing place.

Refer to the operating instructions of the safety wire kit in use together with this installation guide when attaching a safety wire.

Important:

•To prevent the camera from dropping that may cause accidental injury, attach a safety wire between the camera and the installing place. Contact your dealer for attachment of a safety wire.

When installing on a ceiling

<Required camera mount bracket and safety wire kit>

•Camera mount bracket: WV-7010A

•Safety wire kit: WV-Q141

zDetach the tripod mount base from the camera.

x Fix the tripod mount base and the safety		Fixing screw
		Tripod mount base
wire attachment bracket	for ceiling	Safety wire
mount (provided) using the fixing screw.
		attachment
Use the removed screw (used to fix the		bracket for ceiling
tripod mount base).		mount (provided)
When a screw other than the removed
screw (with a different height) is used, it		Safety wire
may result in drop or damage of the
		attachment hole
camera.		(front)
Recommended tightening	torque: 0.39
N·m

Safety wire attachment hole (rear)

cAttach the two safety wires to the safety wire attachment holes (front/rear).

Safety wire attachment hole

Safety wire Safety wire hook

qPass the loop end of the safety wire through the safety wire attachment hole. w Hook the loop end of the safety wire on the safety wire hook.

20