Panasonic manual Technical data GP-US932 and GP-US742 series Specifications, Synchronisation

Technical data GP-US932 and GP-US742 series

Specifications

TV standard				PAL			16:9 HDTV, 60 Hz
Model name	Control unit		GP-US742CUE / GP-US532CBGD				GP-US932CUT
	Camera head	GP-US522HBE	GP-US732HE		GP-US532HGD	GP-US742HWE	GP-US932HT
					(Z-E1015-02)	Modul
Image capture system		1/2“ 3CCD	1/3“ 3CCD		1/3“ 3CCD	1/4“ 3CCD	1/3" 3CCD
Pixels		752 x 582 pixels	753 x 582 pixels		753 x 582 pixels	753 x 582 pixels	---
Synchronisation		Internal or external (Genlock): automatically switchable					Internal or external via SYNC
			-Internal to CCIR standard
			-External (Genlock) input: VBS, VS, HD/VD
			-SC phase for Genlock (VBS): adjustable
			-H phase for Genlock (VBS, VS): adjustable
Video out	Video		2 x FBAS with 1 Vss / 75 Ohm				FBAS with 1 Vss / 75 Ohm
	S-Video (Y/C)	Y: 0.7 Vss luminance level (Y)/75 Ohm / C: 0.3 Vss burst level (C)/75 Ohm					Y: 0.714 Vss luminance level (Y)/75 Ohm;
							C: 0.286 Vss burst level (C)/75 Ohm
	RGB / YPbPr		R,G,B: 0.7 V each /75 Ohm				In either HD or SD format
			Y: 0.7 Vss luminance level/75 Ohm
			PbPr: 0.525 Vss/75 Ohm
			SYNC: 0.3 Vss sync level/75 Ohm
	SDI (Digital)			---			2 x HD-SDI/SD-SDI
Required illumination		2000 Lux at F16, 3200 K	Interlaced scan:		2000 Lux at F8, 3200 K	Interlaced scan:	2000 Lux at F5,6; 3200 K
			2000 Lux at F13, 3200 K			2000 Lux at F13, 3200 K
			Progressive scan:			Progressive scan:
			2000 Lux at F9, 3200K			2000 Lux at F9, 3200 K
Minimum illumination		5 Lux at F2.8 with 12 dB	Interlaced scan:		Interlaced scan:	Interlaced scan:	---
		gain without Sense-Up,	7 Lux at F2.8 with 12 dB		7 Lux at F2.8 with 12 dB	7 Lux at F2.8 with 12 dB
		30 IRE level	gain without Sense-Up,		gain without Sense-Up,	gain without Sense-Up,
			30 IRE level		30 IRE level	30 IRE level
			Progressive scan:		Progressive scan:	Progressive scan:
			14 Lux at F2.8 with		14 Lux at F2.8 with	14 Lux at F2.8 with
			18 dB gain, 30 IRE level		18 dB gain,	18 dB gain,
					30 IRE level	30 IRE level
Signal-to-noise ratio			62 dB (typical)			60 dB (typical)	54 dB (typical)
Horizontal resolution/		800 lines	750 lines		750 lines	700 lines	1080i: 1920 x 1080 pixels
Pixel format		at centre of image	at centre of image		at centre of image	at centre of image	720p: 1280 x 720 pixels
		(Y-Signal)	(Y-Signal)		(Y-Signal)	(Y-Signal)	480i/p: 720 x 480 pixels
White balance		ATW (Auto Tracing White Balance), AWC (Automatic White Balance Control) and Manual
Black balance		ABC (Automatic Black Balance Control) and Manual					Automatic
Colour bars			EBU colour bar with 0 % set-up				SMPTEcolourbarwith7.5%set-up
Electronic shutter		AUTO: 1/50 to 1/10,000 sec. STEP: Selectable 1/50 (OFF), 1/120, 1/250, 1/500, 1/1,000, 1/2,000. 1/4,000, 1/10,000
Gain Selection					AGC and Gain-up (selectable)
CCU box switch			Red/blue Gain (white balance), for brightness level and ZOOM
CCU box computer interface			RS232C with 1x D-SUB 9-pin connector
Lens mount		Special C-mount	C-mount		C-mount	None	C-mount
Power supply			12 V DC (sockets)				12 V DV
							HR10A-7P-4S(73) socket
Power consumption				12 W			Less than 1.5 A / 12 V DC
Ambient operating temperature			0°C to +45°C				0°C to +40°C
Ambient operating humidity			30 % to 90 %				30 % to 85 %
Dimensions	Camera head	34 mm x 44 mm x 52 mm	34 mm x 44 mm x 52 mm		34 mm x 44 mm x 52 mm	Ø 34 mm x 90 mm	37 mm x 47 mm x 60 mm
(HeightxWidthxDepth)	(without mounting)
	Control unit		GP-US742CUE: 170 mm x 44 mm x 227 mm				170 mm x 44 mm x 229 mm
	(without rubber feet		GP-US532CBGD: 140 mm x 20 mm x 200 mm
	and connectors)
Weight	Camera head		approx. 110 g			Less than 50 g	approx. 143 g
	(without lens)
	Control unit		GP-US742CUE: approx. 1.2 kg				approx. 1.2 kg
GP-US742 micro camera block diagram				GP-US742 system structure

Camera head		Control unit
	Analogue process	Digital process
R	W/A AGC			Y
CCD	Gamma	Auto	Encoder	D/A	Video
		Knee		C	OUT
G	AGC	A/D
CCD	Gamma
		DNR	Sync		VBS,
		Detail	Gene-	A/D	VS,
B	W/A AGC	Matrix	rator		HD,
CCD	Gamma				VD
					RGB
					OUT
CCD		Micro		EEP ROM
Drive		processor
Pulse					RS232C
10

Optional accessories	Control unit
C-mount lens *1*2	GP-US742CU
	Camera head
	GP-US522HB
Flexible	12V DC
endoscope *1
Adaptor	Camera cable
Fixed	GP-CA522/4 : 4m
endoscope *1
Adaptor	Camera head
	GP-US732H
Microscope
attachment *1	*1 from third-party manufacturers
	*2 Back focus function not available with
	all C-mount lenses