Panasonic WV-BP142, WV-BP144, WV-BP140 operating instructions Preface, Features, Precautions

Page 1

(Lens Option)

CCTV Cameras

Operating Instructions

Model No. WV-BP140

WV-BP142

WV-BP144

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient

SA 1965 magnitude to constitute a risk of electric shock to persons.

 

The exclamation point within an

 

equilateral triangle is intended to

 

alert the user to the presence of

 

important operating and mainte-

 

nance (servicing) instructions in the

 

literature accompanying the appli-

SA 1966

ance.

 

N0301-0

V8QA5750AN

Printed in Japan

 

 

N 19

For U.S.A

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manu- al, may cause harmful interference to radio com- munications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

The serial number of this product may be found on the bottom of the unit.

You should note the serial number of this unit in the space provided and retain this instruction as a per- manent record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

PREFACE

Panasonic’s WV-BP140/BP142/BP144 series intro- duce a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 510 horizontal

pixels (picture elements). This model offers cut- ting-edge technology for advanced video surveil- lance.

FEATURES

1.The following functions are built in.

(1)Auto Light Control (ALC)/Electronic Light Control (ELC)

(2)Back Light Compensation

(3)Line-locked Sync or Multiplexed Vertical Drive (VD2) (only for WV-BP140 and WV- BP144)/Internal Sync or VD2 (only for WV-BP142)

2.Signal-to-noise ratio of 46 dB (Equivalent to AGC Off)

3.Minimum illumination of 0.08 lux (0.008 foot- candle) with F1.4 lenses

4.Horizontal resolution of 380 lines

5.Shooting of indoor scenes with fixed iris lens by use of Electronic Light Control (ELC) func- tion

6.Selectable auto iris control signal for the lens from a video signal or DC control signal

PRECAUTIONS

1.Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers.

There are no user serviceable parts inside. Ask a qualified service person for servicing.

2.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.

3.Do not expose the camera to rain or moisture, or try to operate it in wet areas. Turn the power off immediately and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.

4.Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when dirty.

In case the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remained part of the detergent in it with a dry cloth.

5.Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.

6.Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

Image 1
Contents Precautions FeaturesClean the CCD faceplate with care PrefaceMajor Operating Controls and Their Functions Connections Focus or FLANGE-BACK AdjustmentStandard Accessories SpecificationsOptional Accessories Panasonic Canada Inc