Panasonic BL-C160, BL-C140 manual Outdoor Ready, Https support, Simultaneous MPEG-4EOand Jpeg

t

BL-C140 BL-C160

w

Outdoor Ready

The splash- resistant body* expands the scope of applications by letting you install the camera outside, like on house or garage eaves.

* IPX4 equivalent splash-resistance

p

HTTPS support

Recorded data is sent in encrypted form, making it very difficult for someone else to "eavesdrop" on the network.

w

Cell phone* PC

* For JPEG only. The audio feature does not work on cell phones.

Simultaneous MPEG-4EOand JPEG

Cameras simultaneously send MPEG- 4*1 images in three resolutions (VGA*2, QVGA, and SCIF), and JPEG images in the same three resolutions in favor motion, standard, and favor clarity image-quality types. MPEG-4 is recommended for viewing smooth motion images, and JPEG is recommended for recording higher quality images.

*1 MPEG-4 is not applicable on a cell phone.

*2 When viewing in VGA, only MPEG-4 playback offers a maximum of 30 fps.

MPEG-4 Visual License

When installing the MPEG-4 viewer program on additional PCs, please purchase additional licenses (Model No. BB-HCA5A for USA, BB-HCA5CE for others).

p

Color Night View Mode*1

When the subject darkens, the camera automatically adjusts the brightness to show you the image. You can see clear, easy-to-view images even in the dark.

OFFON

*1 The image tends to blur more than that in standard mode when viewing a moving subject in low light. When viewing a dark subject in color night view mode, spots of white or colored light may appear in the image. Some subjects may require additional time for focusing with the auto focus function.

Alerting Yourself when Changes Occur

The combination of a built-in human detection sensor*1 that responds to heat and a motion detection function that responds to a preset camera threshold or sensitivity detects even slight motions. Captured images can also be stored temporarily in the camera*2 or sent to you by e-mail*3or FTP data transfer*4.

*1 BL-C160 only.

*2 A maximum of approximately 250 images (320 x 240 pixels) can be stored in the camera.

*3 POP before SMTP authentication and SMTP authentication (PLAIN LOGIN and CRAM-MD5) are supported.

*4 The sensor's detection history can also be e-mailed to you once a day at a preset time.

Full Screen Display

The monitoring image is easier to see because it fills the entire screen.

Normal mode t mode

Power supply via LAN cable

The included Power Transfer Unit supplies the camera the power through the LAN cable. It allows you to install the camera anywhere , like on the ceiling where no power outlet is.

Power	AC adaptor
	AC in
Transfer
Unit	Router

Data /

Power In

Outdoor
LAN cable*	LAN cable

*Use a LAN cable that is no more than 30 m (98 feet 5 inches) long to connect the camera and the power transfer unit.

BL-C140	Housing
Front View	Indicator
	Lens
	Lens cover
Rear View
	Stand mounting hole
Safety wire hole	FACTORY DEFAULT
DATA/POWER IN	RESET button
(LAN port)
BL-C160	Housing
Front View
	Light
Lens cover	Indicator
	Lens
Built-in sensor	Brightness sensor
Rear View
	Stand mounting hole
Safety wire hole	FACTORY DEFAULT
DATA/POWER IN	RESET button
(LAN port)

			Specifications [BL-C160 / 140]
Network camera	BL-C160	BL-C140		Server
Zoom	10 x digital zoom (by area)			Image compression	JPEG (Motion JPEG for moving image display), MPEG-4
Viewing Angle	58 horizontal, 45 vertical			Video resolution	640 x 480, 320 x 240 (default), 192 x 144
Sensor Type	1/4 inch CMOS sensor, approx. 320,000 pixel			Image quality	JPEG (favor clarity, standard, favor motion) , MPEG-4
				Frame rate*1	Max. 30 frames/sec. (640 x 480*2, 320 x 240, 192 x144)
Lens focal point	Fixed (focal range: 0.3 m to ∞ )
				Security	User ID / Password, HTTPS
Lens brightness	F2.8
				Supported protocols	IPv4/IPv6 Dual-Stack,
Required light intensity	5 to 10,000 lx (in color night view mode: 3 to 10,000 lx)
					IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP,
Terminal					ICMP, POP3, NTP, UPnP™, SMTP , Authentication,
Network interface	Ethernet (10Base-T/100Base-TX)				RTP, RTSP*3, RTCP, SSL, HTTPS, TLS,
General					IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6,
					POP3, NDP, NTP, RTP, RTSP*3, RTCP, SSL,
Operating Temperature	-20˚C to +50˚C (-4˚F to +122˚F)
					HTTPS, TLS
Operating humidity	20 % to 90 % (No condensation)
				User access limit	Max. 30 simultaneous accesses
Dimensions(H x W x D)	148 x 108 x 64 mm	106 x 106 x 57 mm			(max. 10 accesses in HTTPS communication)
	(513/16 x 4 1/4 x 2 1/2 inch)	(4 3/16 x 4 3/16 x 2 1/4 inch)
				Buffered images*4	Approx. 250 images (320 x 240)
Weight (only the unit)	495 g (1.09lb.)	280 g (0.62 lb)			-Standard image quality -with time display
Power Supply	AC adaptor : input 100 - 240 V AC, Output 9V DC 750mA			Image transfer method	SMTP*5, FTP, HTTP
Consumption	AC adaptor: 3.2 W (8.1 W when Light is on)	AC adaptor: 3.2 W		Image buffer/transfer triggers	Timer, Sensor or Motion Detection

*1 The frame rate may slow down depending on the network environment, PC performance, image quality, SD memory recording, when color night view mode is activated, etc.

*2 For MPEG-4 only. Not applicable to JPEG.

*3 Only still images in JPEG format can be displayed on a mobile phone.

*4 The maximum number of frames changes depending on the image quality and what object you buffer.

*5 POP Before SMTP Authentication and SMTP Authentication (PLAIN, LOGIN, and CRAM-MD5) are supported.

gMMKKMMMMM

1M08XXSP-C161-LT

All pictures simulated.

Design and specifications are subject to change without notice.