Panasonic 3CCD manual AW-RP655, AW-RP555, AW-RP400, Control Panels

Control Panels

Pan-tilt systems for multiple cameras ready for a wide range of applications.

Multi-function Controller

AW-RP655

(Rear view)

High performance multi-function controller with full camera control function

•Controls maximum five cameras and five pan-tilt heads without hub unit.

•Full camera control by LCD menu

•Control speed can be adjusted by the angle of the operation lever and high speed and low speed mode can be switched.

•50 pre-set memories per camera

•Ergonomically designed joystick controller

•10 tracing memories (Maximum time: 300 sec)

•Maximum control distance from controller to pan-tilt head: 1 000 m (3 280 ft.) (AW-PH360,AW-PH650) This controller can control an AW-PH400 by using a protocol converter (AW-IF400).

•The motion direction of the operation lever can be reversed.

•Two additional controllers can be connected.

•This controller can be placed on a desk or mounted in a rack.

•Power Supply AW-PS505A is required.

Power supply	DC12 V
Power consumption	Approx. 9.0 W
Dimensions(W x H x D)	420 mm x 52 mm x 220 mm (16-1/2 " x 2-1/16 " x 8-11/16 ")
Weight	Approx. 3.5 kg (7.7 lbs)
Accessories	Rack mounting adapters (5U) x 2 Mounting screws (M4 x 8 mm) x 4

Compact Size Controller

AW-RP555

(Rear view)

Compact controller with full camera control function

•Controls up to five cameras and five pan-tilt heads.

•Full camera control by camera menu

•Speed of controls can be adjusted by the angle of the operation lever.

•10 pre-set memories per camera

•Maximum control distance from pan-tilt head to controller:

1000 m (3 280 ft.) (AW-PH360,AW-PH650)

•With a protocol converter (AW-IF400), this controller can control the AW-PH400.

•The motion direction of the operation lever can be reversed or changed.

•This controller can be placed on a desk or mounted in a rack.

(The position of input and output connectors can be changed by 90 degrees)

•Power Supply AW-PS505A is required.

Power supply	DC12 V
Power consumption	Approx. 9.0 W
Dimensions(W x H x D)	210 mm x 58 mm x 177 mm (8-1/4 " x 2-5/16 " x 7 ")
Weight	1.4 kg (3.08 lbs)
Accessories	Rack mounting adapters (5U) x 2 Mounting screws (M4 x 8 mm) x 4

Pan-tilt Controller

AW-RP400

Joystick controller can be changed for seesaw controller.

(Standard accessory)

Seesaw controller

(Rear view)

High performance controller for professional and broadcast use

•Changeable zoom/focus controller (joystick/seesaw)

•Joystick with camera roll control

•50 preset positions

•5 pan-tilt heads control

•Zoom/Focus/Pan/Tilt speed control

•Tally/Intercom function

•10 minutes tracing memory (60 seconds x 10 positions)*

•RS232C interface

•Maximum control distance:500 m (1 640 ft.)**

•Cross control by two controllers

•Camera control inputs (AW-CB400)

•+DC12 V operation (Power Supply AW-PS505A is required.)

*This function does not work for AW-PH405/PH650.

**Maximum 1 000 m (3 280 ft.) by using the Protocol Converter AW-IF400.

Power supply	DC12 V
Power consumption	Approx. 13 W
Weight	Approx. 3.8 kg (8.4 lbs)
Dimensions(W x H x D)	320 mm x 85 mm x 266 mm (12-5/8 " x 3-3/8 " x 10-1/2 ")
Accessories	Zoom switch x 1, Plug (D-SUB 15pin) for tally/INCOM system x 1 set,
	Rack-mounting adapters x 2, Mounting screws (M4 x 8 mm) x 4

Availability of the tracing memory function

	AW-PH400	AW-PH405	AW-PH360	AW-PH650
AW-RP655
AW-RP555	-	-	-	-
	•	•	•	•
AW-RP400	•	-	•*	-

*When you use it with AW-IF400, activating the extended distance transmission function is required.

5