AXIS 206W Quick Installation Guide | Page 5 |
5.Click on the file setup.exe. This starts the AXIS Setup Tool, which lets you configure the wireless settings. See the online help in the setup tool for more information. Note that you should first configure your wireless access point and then duplicate those settings in the AXIS 206W.
6.Specify the type of IP address to use. See the online help for more information.
7.Click OK, close the AXIS Setup Tool and disconnect the USB cable.
8.Wait at least 10 seconds for the settings to take effect and then restart the camera.
Accessing the AXIS 206W
If you set the IP address manually, you can now access the camera’s web interface simply by starting a browser and entering the IP address.
If you selected Obtain IP address via DHCP, you have several options:
•Reconnect the USB cable, browse to the camera as before, and restart the AXIS Setup Tool. The
•If you are using e.g. a home broadband router, you may find it convenient to view the router’s administration pages to discover which IP address has been assigned to your AXIS 206W. Please consult the router’s documentation for further information.
•If your network has an Internet connection (with no HTTP proxy), use the AXIS Dynamic DNS Service to assign your camera a DNS name, which is then used to access the camera. See page 7 for more information.
•If your network uses automatic IP addressing (DHCP) and your computer uses the UPnPTM service, the AXIS 206W will automatically be detected and displayed on your screen. (UPnPTM is a certification mark of the UPnPTM Implementers Corporation.)
•Use AXIS IP Utility 2.0 to discover the IP address. See the CD included in this package.