Section 2 - Installation
Manual Hardware Installation
If you wish to set up your camera without using the Camera Setup Wizard, please follow these steps.
Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard or Zero Configuration Setup.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the camera. Plug the other end into an available port on your router.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then plug the power adapter into a wall outlet.
Configure Your Camera
Refer to“Configuration”on page 19 for information on how to configure your camera.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more information, refer to“WPS - Push Button Setup”on page 17. If your router does not support WPS, you will still be able to set up your camera’s wireless settings in the camera’s web interface.
15 |