D-Link full hd poe wireless n cube network camera manual Image Setup

Page 28

Configuration

Image Setup

In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.

Enable Privacy The Privacy Mask setting allows you to specify up to 3 rectangular areas Mask: on the camera's image to be blocked/excluded from recordings and

snapshots.

You may click and drag the mouse cursor over the camera image to draw a mask area.Right clicking on the camera image brings up the following menu options:

Disable All: Disables all mask areas

Enable All: Enables all mask areas

Reset All: Clears all mask areas.

Anti Flicker: If the video flickers, try enabling this setting.

Mirror: This will mirror the image horizontally.

Flip: This will flip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well.

Power Line: Select the frequency used by your power lines to avoid interference or distortion.

White Balance: Use the drop-down box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold.

Exposure Mode: Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture.

Denoise: This setting controls the amount of noise reduction that will be applied to the picture.

Brightness: Adjust this setting to compensate for backlit subjects.

D-Link DCS-2210/2230 User Manual

28

Image 28
Contents Page Table of Contents Preface Manual RevisionsTrademarks Revision DatePackage Contents System RequirementsFront Hardware OverviewStatus LED Rear Side Micro SD Card SlotConfiguration with Wizard Configuration Start D-Link Setup Wizard SE Configuration Configuration Web-based Configuration Utility Configuration ViewCam Setup Wizard Configuration Live Video Auto Pan Preset PathStop Internet Connection Setup Wizard SetupWizard Configuration Configuration Motion Detection Setup Wizard StepConfiguration Network Setup DNSConfiguration Wireless SetupDCS-2230 only Dynamic DNS Image Setup Sharpness Audio and Video Video Quality Constant bit rate Fixed quality Preset Configuration Motion Detection Time and Date Event Setup Application MediaServerAdd Server Add Media Configuration Add Event Configuration Add Recording Configuration SD Card Advanced Digital Input/OutputICR and IR Https Access List For exampleMaintenance Device ManagementBackup and Restore Firmware Upgrade Status Device InfoLogs Help Internal 5V Power DI/DO Input SpecificationsPin Technical Specifications CameraSystem Appendix Contacting Technical Support For customers within the United StatesWarranty Limited WarrantyLimited Software Warranty Submitting a ClaimWhat Is Not Covered Disclaimer of Other Warranties Copyright Statement FCC CautionIndustry Canada Notice FCC Radiation Exposure StatementRadiation Exposure Statement Registration

full hd poe wireless n cube network camera specifications

The D-Link Full HD PoE Wireless N Cube Network Camera represents a cutting-edge solution for surveillance needs, merging advanced technology with user-friendly features. This camera is designed to provide high-quality video streaming and robust security for both residential and commercial settings.

One of the standout features of this device is its Full HD resolution of 1080p, delivering clear and detailed images, even in low-light conditions. This capability ensures that every facet of the monitored area is captured vividly, allowing for precise identification and reporting in case of security incidents.

Utilizing Power over Ethernet (PoE) technology simplifies installation by allowing the camera to receive power and data through a single Ethernet cable. This means less clutter and fewer cables, making for a neater setup while also providing flexibility in camera placement, as it does not need to be near a power outlet.

The wireless connectivity option provides an additional layer of convenience, allowing users to position the camera in various locations without the need for extensive wiring. This is particularly useful for expansive properties or hard-to-reach areas. Moreover, the camera supports various wireless standards, ensuring a stable connection and seamless integration into existing networks.

Built with intelligent video capabilities, the D-Link cube camera includes features such as motion detection and email alerts, which notify users of any activity within the camera's field of view. This functionality is crucial for proactive security management, allowing users to respond to incidents in real time.

The camera also boasts night vision technology, extending its usability after hours or in low-light environments. This ensures that users can maintain vigilance at all times, providing peace of mind regardless of the hour.

In addition to its impressive hardware features, the D-Link management software is user-friendly and accessible. Users can easily monitor live feeds, adjust settings, and review recorded footage from any device, enhancing overall surveillance efficiency.

Overall, the D-Link Full HD PoE Wireless N Cube Network Camera is a versatile and powerful tool for those looking to enhance their security systems. Its combination of high-definition video quality, PoE and wireless capabilities, intelligent motion detection, and night vision make it an excellent choice for modern surveillance needs. This camera not only protects assets but also adds an additional sense of safety for homes and businesses alike.