Preparing the Cables

To install and use the SCC-C6403P, the following cables should be prepared.

The cable that plugs into the SCC-C6403P power input receptacle has the rated voltage of AC24V, 1.5A.

Check the rated voltage before using the cable.

The SCC-C6403P's cable is a BNC Cable for connecting the video-output terminal to the video-input terminal of the monitor.

1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT)

2. Then, connect the other end of	E
the connector to the Video Input	E
Terminal of the monitor.

3. Now connect the Power Adapter Cable. Use a driver to screw one part of the two lines of Power Adapter to Power Input Terminal of the SCC-C6403P.

4.Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector.

5.Connect the Remote Control Terminal of the SCC-C6403P

and the external Controller.

Controller

Adapter BOARD

2-3

2-4