Samsung SCC-B5396N, SCC-B5398N, SCC-B5398P, SCC-B5396P user manual  Note, Dnr, Motion, Shutter

Page 18

How to use OSD Menu

AGC FIX

LEVEL[01]

Note :

If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated.

DNR

[OFF,LOW,MID,HIGH, USER(1~16)]

￿ ￿ ￿

If you press the SETUP switch with a FIX sub menu selected, you will see the appropriate screen.

As a fixed value of the AGC gain is used in FIX mode, you can select one of the 16 detailed levels from VERY LOW to VERY HIGH before fixing it.

Note :

If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.

If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.

MOTION

[S.SLOW, SLOW, NORM, FAST, F.FAST]

The MOTION menu is used to adjust the strength of the AGC level for a control of the camera motion. This is available only if the SENS-UP menu is set to AUTO.

You can select one from S.SLOW, SLOW, NORM, FAST and F.FAST for the AGC level.

If you monitor a fast moving object in a low contrast scene, select F.FAST while select S.SLOW for a hardly moving object in the same lighting condition.

You can configure the DNR (Digital Noise Reduction) related settings.

Reduces the noise on the screen.

This is especially useful for a severely distorted screen.

You can set the level if you set DNR to USER.

SHUTTER

[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K]

The SHUTTER menu is used to configure settings of the fixed / auto high-speed electronic shutter.

You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high speed electronic shutter, which is mostly used for imaging a fast moving object.

The auto high speed electronic shutter operates as the fixed high speed shutter in a high contrast scene but automatically focuses the target if the iris opens fully in a low contrast scene like in ELC mode. When it gets brighter back, the mode will switch to the fixed high speed electronic shutter mode.

However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO lens.

18 – DIGITAL COLOR DOME CAMERA

Image 18
Contents Camera Safety information Humidity. Doing so may cause fire or electric shock Important Safety Instructions Contents Features IntroductionCamera User’s GuideCeiling or wall。 Video connector Power connector Your camera has the following components LensSetting switches Setup Switch Installation Installing cameraInstallation Adjusting the camera direction Panning Tilting Lens rotationHow to use OSD Menu Using Icons in the MenuMain Menu ITS Backlight DAY/NIGHT Gaming ProfileSub-menus ALC Lens Level RED DAY Mode RED Blue Night ITSCamera Setup Camera ID OFF, onIris ALC If you use an ordinary camera in a scene Size and locationAGC OFF, Very LOW, LOW, MID, HIGH, Very HIGH, USER, FIX With an intensive backlight, the object will beMotion  NoteDNR ShutterOFF, Auto X2, Auto X4, Auto X6, Auto FlickerlessSENS-UP DAYAuto Mask Area Size LocationWhite BAL DAY/NIGHT You can adjust the LL-PHASE Digital ZoomIntelligence How to set the line AdvancedFence How to set the area FIXED/MOVEDDisplay Privacy Zone SetupResolution SensitivityFactory Defaults Other SETOSD Color Fast System InformationLanguage AutoSpecifications Specifications30frame/1sec Auto Iris DC AGC25frame/1sec Weight 980g Color White
Related manuals
Manual 171 pages 37.35 Kb Manual 173 pages 30.11 Kb