Samsung SCO-2080RP Troubleshooting, Specifications, Check the setting of White BAL Setup menu

Page 17

Troubleshooting

If there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from.

Nothing appears on the screen.

Check that the power cord and line connection between the camera and monitor are fixed properly.

Check that you have properly connected UTP cable or BNC cable to the camera.

The image on the screen is dim.

Is lens stained with dirt? Clean your lens with soft, clean cloth.

Set the monitor to proper condition.

If the camera is exposed to too strong light, change the camera position.

The image on the screen is dark.

Adjust the contrast feature of the monitor.

If you have an intermediate device, set the 75Ω / Hi-z properly.

The camera is not working properly, and the surface of the camera is hot.

Check that you have properly connected the camera to an appropriate power source.

The SENS-UP function does not work.

Check that AGC of EXPOSURE SETUP menu is ‘OFF’.

Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.

The Motion Detection function does not work.

Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.

Color is not correct.

Check the setting of WHITE BAL SETUP menu.

The screen flickers continually.

Check that direction of camera turns toward the Sun.

When coaxial communication is not available:

Make sure that the camera and monitor are installed within the recommended distance.

Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded.

IR-LED isn’t lighted.

Isn’t DAYNIGHT function setting up the color mode?

Please change the AUTO or B/W mode.

The camera is not waterproof.

Please check the Front Cover and Main Body by the following Guide Label.

 

Specifications

 

 

 

 

 

SCO-2080RN

 

SCO-2080RP

ELECTRICAL

 

 

 

Input Voltage

DC 12V ± 10% / AC 24V ± 10%

 

Power Consumption

Max 6.8W / 6.5W (IR-LED ON)

 

VIDEO

 

 

 

Imaging Device

1/3 inch, Diagonal 6mm Super HAD CCD

 

Total Pixels

811(H) x 508(V)

 

795(H) x 596(V)

Effective Pixels

768(H) x 494(V)

 

752(H) x 582(V)

Scanning System

2:1 Interlace

 

Synchronization

Internal /Line-Lock

 

Frequency

H : 15.734KHz V:59.94Hz

 

H: 15.625KHz V: 50.00Hz

Horizontal Resolution

COLOR : 600TV line, B/W : 700TV line

 

Min. Illumination

LED ON : 0Lux

 

LED OFF : 0.15Lux (Color, F1.2), 0.0003Lux (Color,SENS-UP x512)

 

Visibility distanse(IR LED)

50m (32EA)

 

S/N (Y Signal)

52dB (Weight On, AGC Off)

 

Video Output

CVBS : 1.0Vp-p, 75Ω composite

 

LENS

 

 

 

Zoom Ratio

3.6x (Manual)

 

Focus Length

2.8 ~ 10.0mm (F1.2)

 

Angular Field of View

H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)

OPERATIONAL

 

 

 

Electronic Shutter Speed

1/60 ~ 1/120k sec

 

1/50 ~ 1/120k sec

On Screen Display

NTSC : 7 Languages, PAL : 15 Languages

 

SSDR

On / Off (Level adjustable)

 

Backlight Compensation

BLC / HLC / OFF

 

Day & Night

COLOR / B/W / AUTO (ICR)

 

Gain Control

Low / High / Off

 

White Balance

ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)

SENS-UP (frame Integration)

Auto / Off (Selectable x2 ~ x512)

 

Motion Detection

On / Off (8 Programmable zones)

 

Privacy Masking

On / Off (12 Programmable zones)

 

3D Noise Filter (SSNRIII)

On / Off (Level adjustable)

 

Digital Zoom

On / Off (x1 ~ x16)

 

Digital Image Stabilization(DIS)

On / Off

 

Camera Title

On / Off (Displayed 15 Characters)

 

Sharpness

On / Off (Level adjustable)

 

Flip / Mirror

On / Off

 

Communication

Coaxial, RS-485

 

Protocol

Coaxial(Pelco), RS-485(SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON,

PANASONIC, BOSCH, HONEYWELL)

 

 

 

ENVIRONMENTAL

 

 

 

Operating Temperature / Humidity

-10°C ~ +55°C / Less than 90% RH

 

MECHANICAL

 

 

 

Water Resistance

IP66

 

Dimension

Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)

Weight

1Kg

 

The specification for this product may change without prior notice for product improvement.

COLOR CCD CAMERA 32 User Guide

COLOR CCD CAMERA 33 User Guide

Image 17
Contents User Guide SCO-2080RN SCO-2080R SeriesModel Description SCO-2080RContents Features Do not install under extreme PrecautionsTemperature conditions Environment Do not install under unstableFront Components and AccessoriesOverview Adjust the lenss zoom and focus Adjust to LensBack ❿ RS-485 control terminalConnecting to Power Connecting to MonitorPlease turn off the power when connecting When the resistance value of copper wire is at 20C68FEnable Using Coaxial CommunicationsControl Cable RET PKTMenu Setup Menu ConfigurationOperating Your Camera LensWhite Balance White Bal ExposureATW BacklightIndoor ManualLens Exposure White BAL Enhanced then adjust the levelSSNR3 You can display pictures in color or black and white DAY/NIGHTSpecial →ColorRetrun Image ADJ SpecialZoom OFF WhiteCan enter up to 15 letters Pressing the Function Setup switchExit Set up the mode using the Function Setup witchInitial value of communication adjustment Specifications TroubleshootingCheck that Motion DET of Special Setup menu is ‘OFF’ Check the setting of White BAL Setup menuDimension Sales Network

SCO-2080RP specifications

The Samsung SCO-2080RP is a high-performance network camera designed to meet the demanding needs of various surveillance applications. As part of Samsung's renowned range of security products, this camera offers a robust suite of features, advanced technologies, and exceptional characteristics that make it stand out in the ever-evolving field of security and monitoring solutions.

One of the key highlights of the SCO-2080RP is its impressive image quality. It is equipped with a 1/3" CCD sensor that captures clear and detailed images even in low-light environments. The camera features a high resolution of 800 TV lines, enabling it to deliver sharp and precise video footage. This is particularly beneficial for situations where facial recognition or detailed analysis is necessary.

The SCO-2080RP also incorporates Wide Dynamic Range (WDR) technology. This innovative feature allows the camera to handle scenes with extreme lighting contrasts, ensuring that both the bright and dark areas of an image are visible. This capability enhances the overall effectiveness of surveillance, particularly in environments with varying light conditions.

Additionally, the camera supports multiple video formats, including H.264 and MJPEG, which provide users with flexibility in terms of bandwidth usage and storage requirements. This ensures that the camera can be seamlessly integrated into existing systems, catering to diverse user preferences and infrastructure setups.

The design of the SCO-2080RP emphasizes durability and adaptability. It comes with a robust enclosure rated at IP66, making it resistant to dust and water, thus suitable for both indoor and outdoor applications. Furthermore, the camera's mechanical IR filter enhances its performance in total darkness, providing night vision capabilities that ensure comprehensive 24/7 monitoring.

The sco-2080rp incorporates advanced features such as motion detection, privacy masking, and alarm triggers that augment its functionality. Users can easily customize their surveillance settings through a user-friendly interface, allowing tailored solutions to meet specific security needs.

Overall, the Samsung SCO-2080RP is an excellent choice for businesses and organizations seeking reliable and high-quality surveillance solutions. Its combination of superior image quality, advanced technologies, and robust design makes it a valuable asset for enhancing security, ensuring peace of mind in various monitoring environments.