4XEM IPCAMWPTZ manual Turning on Auto switch to B/W

Page 48

There are several selectable items for AES. Faster electronic shutter helps seeing fast moving objects more clearly.

Checking “Low lux mode” helps seeing object in poor illuminative environment.

Turning on “Auto switch to B/W

in low lux mode” together with “Low lux mode” being checked, the video will become black and white automatically if the camera is aiming at dark environment.

“Enable BLC” option is for back light compensation. Normally, objects in front of light source are difficult to be seen, checking this option and adjusting “BLC sens level” can help seeing the objects more clearly. The BLC sens level is

about sensitivity of BLC detection.

Clicking on “BLC Area Selection”, a selecting window will pop up. As the window shows, the video is divided to 48 rectangle areas with the same size. Select the areas to enable BLC, if no area is selected, checking “Enable BLC” option makes the video no differences.

- 44 -

Image 48

Contents Page Page Before You Use This Product Package Contents Table of Contents Definitions in Configuration AppendixPage Hardware Installation To install in EthernetDI+ Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-inCheck Network Settings Add Password to Prevent Unauthorized AccessHow to Use AuthenticationPrimary User’s Capabilities Main Screen with Camera ViewConfiguration Camera viewPan/tilt/zoom control buttons CCD control buttons Tilt speedZoom speed Auto patrolClient Settings There are four settings for the client sidePage Administrator’s Capabilities Fine-tuning for Best PerformanceFor Best Real-time Video Images Somewhere Between Real-time and Clear Images Only Quality Images Will DoSelect for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New UsersDemo on Multiple Sites Mid-scale Service Product Demo for E-business Large-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is Detected Click on Save to validate Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings GeneralGet IP address automatically & Use fixed IP address Streaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Image Settings CCD Settings Turning on Auto switch to B/W Page Audio Page Motion Detection Page Preset function area Camera ControlCamera control area Page Preset function area Camera control area Application Setup Weekly ScheduleEvent Operation Sequential Operation Page Factory Default Factory defaultViewing System Log Viewing System ParametersRemote Controller Troubleshooting AppendixPage Page Page URL Commands of the Network Camera OverviewStyle Convention General CGI URL Syntax and Parameters Get Server Parameter ValuesMethod GET/POST Set Server Parameter Values Parameter pairAvailable Parameters on the Server NosyncDate Yyyy/mm/dd Group Security Smtp1 Domain Name Primary Smtp server, max 40 characters MPEG4 Normal quality of video Simplex Listen only Ntsc & Cmos Group Camctrl Drive the Digital Output Query Status of the Digital Input Capture Single Snapshot Account ManagementPrivilege=dido&privilege=listen Configuration File System LogsUpload File firmware Camera ControlPage Recall System InformationPreset Locations Return Technical Specifications Networking