Tyan Computer M3295, M3291 warranty Step

Step 3:

Connect 2x5 ribbon cable between Tyan motherboard COM2 connector and Tyan SMDC J2. (Check with www.tyan.com SMDC FAQ for J2 connector)

Make sure that the key on the ribbon cable aligns with the key on the connector, and that the red line on the ribbon aligns with pin 1 of the connector.

Step 4:

Locate the onboard “SMDC-Link” Network Interface Controller (NIC) on Tyan motherboard. (M3291 uses one of motherboard onboard NIC for IPMI out-of- band. Before using, please make sure which port M3291 used.

You can refer to http://www.tyan.com/support/html/faq_tso.html motherboard Illustration Picture)

16

http://www.tyan.com