American Dynamics 8200-2646-02 B0 Exchange the image format, Device Title Resolution, Quality

7.Click on the Home button to return to the home page while the new image setting acts on the images to effect the desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry onto the home page will find images in their earlier or original setting.)

Exchange the image format

1.Select one of the formats then press the Submit button.

2.The IP camera will restart automatically after several seconds.

Description of function keys:

MPEG4 mode:
		Enter the camera title in the given space.
	Device Title:
	Resolution:	Scroll to choose the image resolution from “VGA” or “QVGA”.
	Quality:	Scroll to choose the image quality out of a spectrum of qualities ranging from
		“highest”, ”high”, “medium”, and “low” to “lowest”. In MPEG4 mode, you can also
		set the quality by typing in the value. The custom quality value must be in the
		range between 64 Kbps to 8192 Kbps.
	Frame rate:	Click on the drop-down list to choose the frame rates of “5FPS”, “10FPS”,
		“15FPS”, “24FPS” or “(25) 30FPS”.
	Format:	Click to choose the “MJPEG” or the “MPEG4” mode.
Fine Tune mode
		Enter your desired quality of image brightness from a spectrum of 0 to 255.
	Brightness:
	Saturation:	Enter the saturation level in the blank (0 to 255).
MJPEG mode:
	Viewer type:		Click to choose the viewer type of the “ActiveX” or “AJAX” mode.
	MJPEG Deinterlace:		Click to choose the MJPEG Deinterlace of the “ON” or “OFF” mode.
	Submit:		Click to submit the new image setting to the IP camera.
	Default:		Click this button to install the default settings in all the entries for
			image parameters on this page.
32			Installation and Operation Guide