Rainbow Technologies QPCF operating instructions SET UP Menus, Main List

2. SET UP MENUS

A convenient system of on-screen menus allows you to set up key features such as sequencer dwell time, camera titles, camera color and time & date. The following paragraphs take you through the menu system step-by-step, describing each menu’s purpose and options.

After connecting all cameras and monitor, please make sure you have plugged the power supply to quad too. Then you’ve already turned on the Digital Color Quad Processor.

<MAIN LIST>

( MENU )

►ALARM DURATION: 02 SEC

BAUD RATE: 9600 BPS

DWELL TIME: 02 SEC

INT AUDIBLE ALARM: ON OFF

EXT AUDIBLE ALARM: ON OFF

SET TIME: YY:MM:DD:HH:MM:SS

DWELL SETUP (CH 01): ON OFF

ALARM POLARITY (CH 01): HIGH LOW OFF

CAMERA TITLE SETUP (CH 01): CH1

EVENT LIST

VIDEO SET SYSTEM RESET

2.1 MAIN LIST

1.Press ▲▼ to select function

2.Press ENTER to get into the selection

3.Press MENU to exit the menu

2.2 ALARM DURATION: to set up the alarm duration time

1.Use “+”, “-“ to set this option in seconds (1-99).

2.Press MENU to exit

2.3 BAUD RATE: to set up remote control baud rate

1.Use “+”, “-“ to set remote control baud rate (115200, 57600, 19200, 9600, 4800, 3600, 2400 and 1200)

2.Press MENU to exit

2.4 DWELL TIME: to set up the auto switching time

1.Use “+”, “-“ to set up switching time in seconds (1-30) when it’s on auto switching mode.

2.Press MENU to exit

2.5 INT AUDIBLE ALARM: to set up internal alarm

1.Use ◄► to select the built-in internal alarm ON/OFF

2.Press MENU to exit

2.6 EXT AUDIBLE ALARM: to set up external alarm

1.Use ◄► to set up the external alarm system ON/OFF

2.Press MENU to exit

2.7 SET TIME: to set up date time

1.Use “+”, “-“ to increase/decrease value.

2.Use ◄► to select the item that you would like to set up.

3.Press ENTER to choose the time display mode “ YY/MM/DD/hh/mm/ss “, “DD/MM/YY/hh/mm/ss” or

“TIME DISPLAY OFF”

4.Press MENU to exit

2.8 DWELL SET UP: to set up auto switching channel

1.Press ▲▼ to select channel

2.Use ◄► to select ON/OFF.

3.Press MENU to exit

<2>