Hardware Installation
Attaching the Metal Mounting Plate
To attach the metal plate, remove the two rubber pads under the base of the camera firstly. Place the metal plate onto the camera base, and align the two holes of metal plate with two screw holes on the base. Secure the metal plate to the base with two screws (provided). Then, you can:
1.Install the camera to the ceiling using two ceiling screws (a); or,
2.Install the camera to the wall using two wall screws (b).
Connecting the Ethernet cable
Connect an Ethernet cable to the network cable connector located on the Pan/Tilt Internet Camera’s rear panel, and then attach it to the network.
Attaching the Power Supply
Attach the external power supply to the DC power input connector located on Pan/Tilt Internet Camera’s rear panel, and then connect it to your local power supply.
(a)(b)
Base of Camera
TIP: | You can confirm power source is supplied from the LED indicators |
| label Power on the Pan/Tilt Internet Camera is illuminated. |
10 | NS380 / NS380W User Guide |
| YML826 Rev1 - Pan/Tilt Internet Camera |