Using wireless mode
Viewing pictures/videos wirelessly
Wirelessly view pictures and videos from your computer right on your frame using the KODAK EASYSHARE Digital Display Software.
Before you proceed:
1Make sure you install the software packaged with your frame (see page 9). Connect to your wireless home network (see page 5), then verify your computer connection (see page 10).
Your frame can now access the content on your host computer, wirelessly. Your computer appears as a picture source icon on your frame (see page 30).
NOTE: If you have more than one frame on your wireless network, give them unique names using the
2On your frame, tap (Home) → (Pictures and Videos).
3Highlight your home computer (), then tap OK. It may take up to 10 seconds for your Network Computer to appear on the Home screen.
If your network computer is not listed on the Home screen, go to troubleshooting help on page 67.
NOTE: The first time you connect, a message may appear on your computer screen alerting you to a new device. Follow the prompts to "allow" the frame on your computer.
4Highlight the category of pictures (such as Pictures and Videos, StoryShare Albums, and New Picture Chronicles) that you want to view, then tap OK.
All Pictures and Videos displays every picture and video that your computer is sharing, without showing folders. The categories are established by the EASYSHARE Digital Display Software (see page 53).
45 | www.kodak.com/go/support |