DEFAULT
This setting returns the DPF to factory settings.
Slide Show Time | YES |
Transition Effect | NO |
Language |
|
Brightness |
|
Contrast |
|
Saturation |
|
Hint Time |
|
Default |
|
Press | or | to select Default. Press OK. |
Press | or | to toggle YES/NO. Press OK to conifrm |
If you select NO: you will be returned to the Setup Screen.
If you select YES: the screen will momentarily blank. The DPF will then return to the Main Menu.
If you now switch off or set the frame to Standby:
When you next switch on the language selection screen will appear. Refer to Page 8.
TROUBLESHOOTING
If your DPF seems not to be working as well as you might expect, please work through this checklist before returning the product to Tesco.
The DPF will not switch on.
Switch off, Check the power supply connections, switch on again. The DPF will not recognise a memory card.
The DPF will not play pictures on a card.
The pictures must be in jpg form and smaller than 8000x8000 pixels.
The handset is erratic.
The handset is too far from the frame. There is something between the handset and the DPF. Replace the battery.
FURTHER INFORMATION
After extended use, the frame may get warm. This is normal and not a cause for concern.
The best resolution for pictures is 800*600 pixels. Pictures above this resolution will not display any better and large pictures will slow load- ing times.
Page 15