Sylvania SDPF1033 Photo Setting Display Interval, Transition Effect, Display type, Slide mode

Page 7

The adjustment screen for the SETUP menu is as follows:

3.1 Photo Setting

3.1.1 Display Interval

This option can be used to set the length of time for display of each image. There are six options: 5 seconds, 10 seconds, 15 seconds, 30 seconds, one minute, or three minutes.

3.1.2 Transition Effect

This option is used to set the transition effect as images change.

3.1.3 Display type

This option is used to set the display type.There are two available option.Fit screen or full screen.

3.1.4 Slide mode

This option is used to set the slide mode.There are three available option. Normal,Motion,date&time.

5

Image 7
Contents USER’S Manual Contents Edit Product introduction Button operation introduction for main unit Button of remote control manual System SettingsDisplay type Photo Setting Display IntervalSlide mode Transition EffectBrowse Display Setup 3.3.1 BrightnessAuto Play Contrast Custom Setup 3.4.1 OSD LanguageTFT Brightness Encoding Repeat modeLogo type Exit DefaultPhoto USB sourcePhoto+Music MusicCalendar MovieDate Display Set Date ClockClock Display AlarmSet Time Enable Auto-PowerPower On Enable Edit Power off EnableDelete CopyBasic Operations FavoriteScreen Saver Repetitive Playback Fast forward/ Fast rewind playVol + / Vol-/ Mute NEXT/ Prev FunctionRotate JPG Images Zoom Enlarge ImagesDaily protection and maintenance