Philips 52PFL8605 /98, 46PFL8605S/98, 42PFL8605S/98 EasyLink buttons, Adjust EasyLink settings

EasyLink buttons

You can control EasyLink-compliant devices with the following buttons on the remote control of your TV.

Button	EasyLink function
OK	Starts, pauses or resumes
	playback on your EasyLink
	device.
	Activates a selection or
	accesses the menu of your
	EasyLink device.
(Previous)	Searches backward on your
	EasyLink device.
(Next)	Searches forward on your
	EasyLink device.
0-9	When EasyLink is enabled,
(Numeric	selects a title, chapter or track.
buttons)
(Navigation	Navigates through the menus
	of your EasyLink devices.
buttons)
(Options)	Displays the menus of your
	EasyLink device. Note that
	when (Home) is pressed,
	the TV menu is displayed.
(Standby-	When EasyLink is enabled,
On)	switches the TV and all
	EasyLink devices to standby.
	Press and hold (Standby-On)
	for at least 3 seconds.

Adjust EasyLink settings

1	When watching TV, press (Home).
	»» The home menu appears.
2 Press the Navigation buttons to select
3	[Setup], then press OK.
	Select [Advanced TV settings], then
4	press OK.
	Select [EasyLink], then select a setting to
	adjust:
	• [EasyLink]: Enables one-touch play
	and one-touch standby between
	EasyLink-compliant devices.
	• [EasyLink Remote Control]: When
	EasyLink is enabled, allows remote
	control key forwarding.
	• [TV speakers]: Turns TV speakers
	on or off. Setting TV speakers
	to automatic mode turns off the
	speakers when content from an
	EasyLink-compliant home theater
	system is detected.
	• [Pixel Plus link]: When EasyLink is
	enabled, automatically applies the
	best Pixel Plus setting if there is
	more than one (for example, if both
	your TV and DVD player support
	Pixel Plus).
	• [Auto subtitle shift]: Enables or
	disables display of subtitles from
	Philips EasyLink compliant Home
	Theatre Systems over the video
	image on your TV. The video image
	is stretched across the whole of TV
	display, without the need to create a
	separate subtitle bar at the bottom
	of the screen
	• [HDMI 1 - ARC]: Enable or disable
	HDMI ARC (only if a HDMI ARC
	compliant device is connected to the
5	HDMI ARC connector on the TV).
	Press OK to confirm your choice.

»» The EasyLink setting is applied.

E n g l i s h

Downloaded From TV-Manual.com Manuals EN 37