Philips 47PFL7603D Use your TV, Switch your TV on/off or to standby, Watch TV, Switch channels

Page 12
4.Use your TV

ESPAÑOL FRANÇAISE ENGLISH

4.Use your TV

This section helps you perform basic TV operations.

4.1Switch your TV on/off or to standby

To switch the TV on

• Press . POWER at the right side of the TV.

POWER

4.2Watch TV

Switch channels

1.Press a number (1 to 999) or press CH+ or CH- on your remote control.

For digital channels, press a number (1 to 999) followed by a dot "." and then the corresponding sub channel number (1 to 999). Ex. 108.30.

2.Press PREV CH to return to the previously viewed TV channel.

To switch to standby

Press . on the remote control.

To switch on from standby without the remote control

Press . POWER at the right side of the TV to switch the TV off.

Press . POWER again to switch the TV on.

To switch off

Press . POWER at the right side of the TV.

DDNote

Energy consumption contributes to air and water pollution. When the power cord is plugged in, your TV consumes energy. Your TV has a very low standby power consumption.

DDNote

You can also switch channels by pressing CHANNEL - or + on the side controls of the TV.

Adjust volume

1.Press VOL+ or VOL- on your remote control.

2.Press MUTE on your remote control to mute the sound.

Press MUTE again or press VOLUME - or + to restore the sound.

DDNote: You can also adjust the volume by pressing VOLUME - or + on the side controls of the TV.

To increase the headphone volume, press the volume button on the TV or remote control.When headphones are plugged into the TV, the loud speakers are automatically muted.

EN-10

Downloaded From TV-Manual.com Manuals

Image 12
Contents Downloaded From TV-Manual.com Manuals Downloaded From TV-Manual.com Manuals FRANÇAISE ENGLISH Product SafetyKnow these safetysymbols Proof ofENGLISH 0/24!.423!&%49 .3425#4/.3 2EAD BEFOREBOPERATINGEEQUIPMENTESPAÑOL FRANÇAISE ESPAÑOL FRANÇAISE ENGLISH EN-3Contents 10. Troubleshooting 11. Notes for the use of USB devices12. Technical specifications 13. Index 14. Warranty Your TV1. Important 1.1 Product information1.2 Screen care 1.3 Environmental care2.2 Remote control 2. Your TV2.1 Television overview FRANÇAISE3.2 Install the remote control batteries 3. Get startedFRANÇAISE ESPAÑOL3.4 Connect the power cord 3.5 Manage cablesTo connect the power cord To disconnect the TV from the power outlet3.6 Switch on and setup the TV 4.1 Switch your TV on/off or to standby 4. Use your TV4.2 Watch TV To switch the TV on4.3 Watch channels from a set-top box 4.4 Watch connected devices4.5 Watch a DVD If the picture does not appear5.1 Understand the remote control 5. Use more of your TVAmbilight settings on page FORMAT5.2 Use the quick access menu 5.3 Change picture and sound settingsSee Change sound settings on page Change picture settings by using the setting assistantSummary of picture settings Change picture formatSummary of picture formats Automatic5.4 Change Ambilight settings Change sound settingsSummary of sound settings Automatic volume leveling AVL5.5 Use Auto Mode 5.6 Create and use lists of favorite channelsPower saver Switch to one of the channels on a list5.8 Set the sleeptimer 5.7 Set the clockSet the time automatically Set the time manually5.9 Use child control and rating locks Set or change your PINLock the TV Lock a channelUse the TV ratings lock Summary of TV ratingsUse the movie ratings lock Summary of US movie ratingsSummary of Canadian movie ratings Summary of Canadian French movie ratings5.10 View closed captions subtitles InstallationSelect caption services Use the region ratings lock5.11 View photos and play music on a USB device Summary of caption services CC-1, CC-2, CC-3, and CC-4T-1,T-2,T-3 and T-4 CS-1, CS-2, CS-3, CS-4, CS-5 and CS-6ESPAÑOL 1. After connecting your USB storage device to the TV, press Æ toView your pictures on a USB device Details / More details5.12 Use your TV in HDTV mode 5.13 Use your TV as a PC monitorConfigure your TV in HDTV mode Supported screen resolutions5.14 Use Philips EasyLink 5.15 Use the demo modeOne-touch play One-touch standby6. Change your TV installation 6.4 Optimize the signal quality from your antennaFRANÇAISE 6.1 Select your menu language6.5 Uninstall and reinstall channels 6.6 Return your settings to default values6.7 Show emergency alerts EAS Configure emergency alerts7. Update your TV software 7.2 Prepare for the software upgrade7.3 Upgrade software 7.1 Check your current software version8. Connect devices 8.1 Connection overview5. Service UART 1. Antenna input 2. AV18.2 Select your connection quality 8.3 Label your connectionsHDMI - Highest quality Component YPbPr - High quality8.4 Connect your devices Connect a DVD player via S-Video and audio connectorsConnect a set-top box, DVD player/recorder and game console via HDMI Connect a set-top box via a composite connector ENGLISHConnect a digital home theater amplifier Connect a PC with an S-Video connector at the back Connect a PC with an S-Video connector at the sideConnect a PC with a DVI connector Connect a PC9. Glossary RGB signalsS-VHS signals ESPAÑOL10. Troubleshooting SymptomsPossible cause What should you do11. Notes for the use of USB devices Digital Content IssuesDigital Camera Issues USB Memory Device Issues12. Technical specifications EN-3713. Index Page 14. Warranty PHILIPS LIMITED WARRANTY ONE 1 YEARWARRANTY COVERAGE WHAT IS COVERED2007 Koninklijke Philips Electronics N.V. All rights reserved Document order number 12NC 3139 125
Related manuals
Manual 3 pages 20.26 Kb

47PFL7603D specifications

The Philips 47PFL7603D is a remarkable television that combines advanced technology with stylish design, offering an immersive viewing experience for its users. With a screen size of 47 inches, this model is part of Philips' renowned line of LCD TVs, providing an excellent balance between size and picture quality.

One of the standout features of the 47PFL7603D is its Full HD resolution. It supports 1080p, delivering crisp and clear images that enhance the viewing experience. Whether you’re watching movies, playing video games, or streaming your favorite shows, the picture quality remains vibrant and detailed, capturing even the finest nuances in every image.

This model is equipped with Philips' Pixel Plus 2 HD technology, which enhances the clarity of the images by improving the resolution and creating smoother motion visuals. This technology reduces noise and enhances contrast, ensuring that every frame is as sharp as possible. Coupled with a 100Hz refresh rate, fast-moving scenes are rendered smoothly, making it ideal for action-packed movies and sports.

Color reproduction is another highlight of the 47PFL7603D. The Dynamic Contrast feature enables the television to offer a richer palette of colors, ensuring lifelike visuals that can adapt to various lighting conditions. This feature ensures that blacks are deep and whites are bright, creating an immersive experience that captivates viewers.

In terms of connectivity, the Philips 47PFL7603D comes with multiple HDMI ports, allowing users to connect various devices such as gaming consoles, Blu-ray players, and sound systems. This versatility ensures that you can easily integrate the television into your home entertainment setup.

Moreover, the television features USB connectivity, enabling users to view photos, play music, and watch videos directly from a USB drive. This adds an additional layer of convenience, making it easier to share content with family and friends.

The slim design of the Philips 47PFL7603D enhances its aesthetic appeal, making it a stylish addition to any living space. The sleek profile and minimalistic bezels ensure that the focus remains on the screen, creating an enjoyable viewing environment.

In summary, the Philips 47PFL7603D is a well-rounded television that excels in picture quality, connectivity, and design. With its advanced features such as Full HD resolution, Pixel Plus 2 HD technology, and a range of connectivity options, it is designed to cater to the diverse needs of modern consumers, providing a stellar viewing experience.