Note on the power supply lead (yellow)
When you connect other devices to this
circuit is higher than the total fuse value of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the metal body or chassis of the car.
Never connect speaker wires with stripes to one another.
Connection: for cars with ISO connectors
Caution
Ensure that all loose leads are insulated with electrical tape.
Note
Consult a professional to connect CEM2100 as instructed below.
1Connect the supplied male connector to the unit.
2Check the car’s wiring carefully and connect them to the the supplied male connector.
Note
Risk of danger! Please consult a professional to perform the below steps!
1Green/black Left speaker (Rear) strip
2White/black Left speaker (Front) strip
3 | Gray/black | Right speaker (Front) |
| strip |
|
4Purple/black Right speaker (Rear) strip
e | Red | Ignition key +12V DC |
|
| when ON/ACC |
f | Blue | Motor/electric antenna |
|
| relay control lead |
gBlue/white
|
| lead |
h | Black | Ground |
i | Yellow | To the +12V car |
|
| battery which is |
|
| energized at all times |
3
10EN