Philips MCM129 user manual Prepare the remote control, Turn on, Play from disc, Play from USB

Open the battery compartment.

Insert one CR2025 battery with correct polarity (+/-) as indicated.

Close the battery compartment.

Prepare the remote control

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

•• Risk of decreased battery life! Never mix different brands or types of batteries.

•• Risk of product damage! When the remote control is not used for long periods, remove the batteries.

•• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

For first-time use:

Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1

2

3

Turn on

Press POWER.

»»The unit switches to the last selected source.

Switch to standby

Press POWER again to switch the unit to standby mode.

»»The red standby indicator turns on.

»»The backlight on the display panel turns off.

4 Play

Play from disc

1 Press SOURCE repeatedly to select the DISC source.

2 Pull to open the disc compartment on the top of the device.

3 Insert a disc with printed side facing upward.

4 Close the disc compartment.

»»Play starts automatically. If not, press .

Play from USB

Note

•• Make sure that the USB device contains playable audio content.

1 Press SOURCE repeatedly to select the USB source.

EN 7