Philips MCM108B, MCM108C owner manual CD/MP3 Operation Radio Reception, Maintenance

CD/MP3 Operation

Radio Reception Other Connection

3Press ¡1 2™ to select a desired track.

➜ The album number will change accordingly as you reach the first track of an album by pressing ¡1 or the last track of an album by pressing 2™ .

4Press 2; to start playback.

● During playback, press once ALBUM 4 3 to

show the current album number.

Supported MP3 disc formats:

– ISO9660, Joliet, UDF 1.5

– Maximum title number: 256 (depending on

filename length)

– Maximum album number: 99

Notes:

–The SHUFFLE and REPEAT functions cannot be used simultaneously.

–SHUFFLE play is not available in the programe mode.

Programming track numbers

Programme in the STOP position to select and store your disc tracks in the desired sequence. If you like, store any track more than once. Up to 20 (10 for MP3 disc) tracks can be stored in the memory.

1 In the stop position, use the ¡1 2™ to select your desired track number.

					O	E
						P E N / CLOS
STANDBY-ON	SOURCE	BAND	PROG/CLOCK	-	VOLUME	+	TUNING

Helpful hints:

To improve radio reception:

–For FM, extend coil antenna at the back of the unit fully for optimum reception.

Listening to an external source

You can listen to the sound of the connected external device through your system’s speakers.

1Select AUX source.

2Use a line-in cable (not supplied) to connect MCM 108’s AUX-IN jack (3.5 mm ) to an AUDIO OUT or headphone jack on an external equipment (such as CD player, or VCR).

– Supported sampling frequencies: 32 kHz,

44.1kHz, 48 kHz

–Supported Bit-rates: 32~256 (kbps), variable bitrates

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback.The REPEAT modes can also be combined with

PROGRAMME.

SHUFFLE	tracks of the entire disc are
	played in random order
REPEAT ALL ...	repeats the entire disc/
	programme
REPEAT	plays the current track
	continuously

●For MP3, you may press ALBUM 4 3 to

select a desired album, then press ¡1 2™ to select your desired track.

2Press PROGRAM (or PROG/CLOCK on

the set) to store.

➜ Display: PROG flashes, and is displayed briefly, then the selected track number (and the selected album number for MP3).

3Repeat steps 1-2to select and store all desired tracks.

➜ FULL is displayed if you attempt to programme more than 20 (10 for MP3 disc) tracks.

4To start playback of your disc programme, press 2;.

Tuning to radio stations

1Select TUNER source.

➜ is displayed.

TUNER

2Press BAND (TUNER on the remote control) once or more to select your waveband.

3Turn TUNING 0 to tune to a station.

➜ Display shows: the frequency of the tuned station.

Maintenance

REPEAT ALB ... repeats all tracks in the current

(for MP3 only) album

1To select your play mode, press the SHUFF or REPEAT on the remote control before or during playback until the display shows the desired function.

2Press 2; (on the remote control 2;) to start playback if in the STOP position.

➜ If you have selected SHUFFLE, playback starts automatically.

3To return to normal playback, press SHUFF or REPEAT on the remote control until the various SHUFFLE/ REPEAT modes are no longer displayed.

●You can also press 9 to cancel your play mode.

Reviewing the programme

●Stop playback and press PROGRAM (or PROG/CLOCK on the set) repeatedly.

➜ Display first shows a programme sequence, then the stored track number (and the album number for MP3).

●To exit review mode, pressÇ.

Erasing the programme

You can erase the programme by:

●pressing 9 once in the STOP mode;

●pressing 9 twice during playback;

●opening the CD compartment;

●Select another sound source.

➜ PROG disappears from the display.

Cleaning the Cabinet

●Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

●When a disc becomes dirty,

clean it with a cleaning cloth. Wipe the disc from the centre out.

● Do not use solvents such as benzene, thinner, commercially

available cleaners, or antistatic

spray intended for analogue records.

Cleaning the disc lens

●After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

13

14