Philips MCM1006 user manual Program tracks, For a CD, For a WMA/MP3 disc, Erase the program

Page 8

Program tracks

Note

You can program a maximum of 20 tracks.

During programming, if no operation is made within 20 seconds, the system returns to stop mode without saving programmed tracks.

For a CD

1Press to stop play.

» The total number of tracks is displayed.

2Press PROG to activate the programming. » PROG is displayed, and blinks.

3Press / (or ALBUM - /ALBUM +)

to select a track.

» The track number blinks.

4Press PROG again to program the selected track.

5Repeat steps 3 and 4 to program more tracks.

6Press to start play.

For a WMA/MP3 disc

1Press to stop play.

» The total number of tracks is displayed.

2Press PROG to activate the programming. » PROG is displayed, and blinks.

3Press / (or ALBUM - /ALBUM +)

repeatedly to select an album.

» The album number and ALB blinks.

4Press PROG album.

»A track number is displayed, and ALB disappears.

5Press / (or ALBUM - /ALBUM +) repeatedly to select a track.

6Press PROG track.

7Repeat steps 3 to 6 to program more tracks.

8Press to start play.

Erase the program

To erase the program,

Press twice.

Slide the power switch and source selector.

EN 9

Image 8

Contents MCM1006 Contents Safety ComplianceCare of the environment Copyright Introduction Whats in the boxOverview of the system Connect power Get startedPlay discs Turn on and select a sourceProgram tracks For a CDFor a WMA/MP3 disc Erase the programPlay from a USB storage device Listen to radio Use the DBB sound effect Adjust soundAdjust the volume level Product information USB playability informationGeneral information DiscMaintenance Supported MP3 disc formatsTroubleshooting