Philips CDC 775 manual Contents Introductioninstallation

pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 9

CONTENTS

INTRODUCTIONINSTALLATION

Introduction . . . . . . . . . . . . . . . . . . . . . . .9

Installation . . . . . . . . . . . . . . . . . . . .9 - 10

Functional Overview . . . . . . . . . . .11 - 13

Playback . . . . . . . . . . . . . . . . . . . . .14 - 18

Programming . . . . . . . . . . . . . . . . . . . . .18

Edit . . . . . . . . . . . . . . . . . . . . . . . . . .19 - 20

Additional Information . . . . . . . . .20 - 21

Troubleshooting . . . . . . . . . . . . . . . . . . .21

Thank you for selecting the Philips CDC 775 Compact Disc Changer.

A Compact Disc Changer of the state-of-the-art Philips 700 series, the CDC 775 combines supreme playback quality with a high degree of user-friendliness by offering the following possibilities:

–able to play CD-RW disc;

–changing CDs during play;

–quick access to a particular CD by means of QUICK PLAY;

–storing 40 tracks from different CDs in any desired order in the changer memory;

–storing the required recording time and playing time in the EDIT mode.

Power Supply Setting

•Check that the type plate on the rear of your changer indicates the correct supply voltage.

•If your mains supply voltage is different, consult your dealer or our Service Organisation.

Siting the Compact Disc Changer

Free standing

•Always position the changer horizontally on a flat, firm surface.

•Allow a free space of at least 3 cm above the changer so as not to interfere with the cooling of the changer.

In an audio rack

• The changer can be sited in any desired position.

Stacked

•Site the changer preferably at the bottom or at the top.

•Never position the changer directly on top of a high- power amplifier, as such an amplifier gives off a substantial amount of heat.

RECEIVER

CASSETTE DECK

CD CHANGER

English

9