Installation (Illustration page 3)
English
1.Connect the LINE IN cable (green color) from OUT 1 at the soundcard to INPUT 1 LINE , AND
2.Connect the SURROUND IN cable (black color) from OUT 2 at the soundcard to INPUT 1 SURR (only applicable if a
3.Connect another LINE IN cable from another
stereo audio-visual source to INPUT 2 STEREO,
AND/OR
4.Connect another LINE IN cable from another stereo
5.Connect the front left satellite speaker to
SATELLITE FR.L
6.Connect the front right satellite speaker to
SATELLITE FR.R
7.Connect the surround left satellite speaker
to SATELLITE SR.L
8.Connect the surround right satellite speaker
to SATELLITE SR.R
9.Connect the Remote Control
10.Connect the fixed mains power cord to the AC outlet
11.Switch on (and switch off as well) the system using the STANDBY button on the remote control
12.Tune the system using the controls on the soundcard/ sound source and the controls on the remote control
NOTE: Do not insert the power plug into the AC outlet until all connections are made!
Safety
•Do not expose the speakers to excessive heat (caused by heating equipment or direct sunlight). To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. If fluid spills into the speakers, disconnect any connections immediately and let the speakers dry before reusing them.
•You may clean the speakers with a soft, slightly dampened
•If the speakers do not operate, disconnect them from the power supply. Wait a few seconds before reconnecting them to the power supply.
8