Philips CSM1000/00 user manual Overview of the main unit

Page 5

Overview of the main unit

d e f

aPHASE

• Adjust the phase of subwoofer signal.

bFREQUENCY

•Set LPF (low-pass-ﬁlter) frequency from 80Hz to 120Hz.

cVOLUME

•Adjust volume from 0 to maximum level.

dINPUT (Ch1, Ch2)

• To connect car audio with RCA cable.

ePOWER

•Light in blue when power is turned on.

fPROTECTED

•Lights in red when the protector is activated.

gPOWER/HIGH LEVEL INPUT

•To connect power supply (+12V- DC power supply, ground wire, and remote control wire) and car audio with bare wires.

6EN

Image 5

Contents CSM1000 Contents Koninklijke Philips Electronics N.V. All rights reserved SafetyWhat’s in the box Check and identify the contents of your packageIntroduction Overview of the main unit Connect wires InstallationMount the subwoofer in car Mount the subwoofer with the supplied screws and bracketsCSM1000 Car audio Adjust frequency Adjust phaseAdjust volume About the protector indicatorProduct information Weight main unitSpeaker type Active subwoofer 550WattAlternate noise is heard Troubleshooting