Troubleshooting
•Safety and | Troubleshooting |
| |
Troubleshooting |
|
•FAQs |
|
| This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these |
•Common Problems | solutions, contact Philips customer service representative. |
•Imaging Problems
Common Problems
•Regulatory Information
Having this problem
No Picture (Power LED not lit)
No Picture
(Power LED is White)
Check these items
●Make sure the power cord is plugged into the power outlet and into the back of the monitor.
●First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
●Make sure the computer is turned on.
●Make sure the signal cable is properly connected to your computer.
●make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.
●The Energy Saving feature may be activated
Screen says
●Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick
●Check to see if the monitor cable has bent pins.
●Make sure the computer is turned on.
AUTO button doesn't function in VGA mode
Imaging Problems
Image is not centered
●The auto function is applicable only in
●Press the Auto button.
●Adjust the image position using the Phase/Clock of Setup in OSD Main Controls.
file:///D/cd manual/philips/244E1/lcd/manual/ENGLISH/244E1/safety/saf_troub.htm（第 1／3 页）7/11/2009 2:23:14 PM