Philips 100WT10P manual Power Supply, Battery

Page 7

3 POWER SUPPLY

5

There are two sources of power for 100WT10P operation: the battery and the AC adapter.

3.1 AC

You may operate your 100WT10P with AC power in two different ways. Mounted in the base station, or connected directly to the AC adapter.To run your 100WT10P on the base station, place the pad into and connect the AC adapter to the jack at the rear of the base station.To plug the product directly to the AC adapter, locate and plug into the DC-in jack at the lower left corner of the product, under the orange rubber protector.

3.2Battery

3.2.1.When using the 100WT10P for the first time, it is advisable to charge the battery for at least 5 hours.

3.2.2.After the initial charging, when not in use, the 100WT10P takes approximately two hours to fully charged; it takes 3 hours to fully charged while in use. A fully charged battery lasts up to 4 hours.

3.2.3.The power light on the top right indicates the level of battery charge. Turn on the power to see the power light.

Full charge The power light is solid green.

Low charge The power light is blinking green when the battery's remaining charged falls to less than 6 percent.

Critical low charge The power light blinks amber when the charge falls under 3 percent. If your 100WT10P is powered up and immediately enters the suspend mode, it means the battery is uncharged.To avoid loss of data in memory, fully charge the unit within 24 hours.

CAUTION: Recharge the 100WT10P any time a low charge warning appears.

Failure to recharge the battery will result in loss of data contained in internal memory (RAM).

3.2.4.In order to optimize battery operation, open only the applications you are actually using. To conserve battery power, disable WLAN when it's not in use.

3.2.5.To change battery

1.Suspend your 100WT10P by turning the power switch to the OFF position.

2.Unlock the battery latch 1

3.While one hand holds the battery latch two in the unlocked position, use the other hand to pull the battery out of the slot.

4.Replace with another battery

NOTE: When fully charged and not in use, your 100WT10P has a life of one week.

CAUTION:

1.Suspend your 100WT10P before removing or changing the battery pack.

2.To avoid loss of data in memory, insert a charged battery in 24 hours.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Table of Contents Introduction Before YOU BeginPacking list Bottom Physical AppearanceRight View Left ViewRuggedized Design Front ViewBase Station Mini-VGA to VGA CableGetting Started Base station setupLoad battery Wlan setupBattery Power SupplyTo make changes to power saving setup Stylus Data Input to the Touch ScreenTo close Transcriber To recalibrate the stylus tapping pattern To test your double-tap patternOn-Screen Keyboard Method Two Connecting to a NetworkWlan Method OneLAN USB Data SynchronizationOn your 100WT10P to setup for IR ActiveSync Featured Software ApplicationsControl Panel Microsoft Internet ExplorerTo launch VGA utility Wordpad Registry Utility100WT10P will not turn on… TroubleshootingMy system does not run smoothly… How do I turn off my 100WT10P? When I use the stylus pen…How do I use the on-screen keyboard? Is MS Transcriber supported by RDP?Is Cisco Leap supported? To clean the screen Safety and Product Care InstructionsTo clean the case Appendix a Specifications Multimedia StorageFax/Modem NetworkAppendix C Proprietary Notice and Liability Disclaimer CE Declaration of Conformity Removable BatteryFederal Communications Commission FCC Notice ESD Warning Appendix D Regulatory InformationFCC Warning FCC Radiation Exposure StatementEnd-of-Life Disposal How to connect a plugInformation for UK only To change a fuse in this type of plug proceed as follows3138 105 M73-PLPOA-130

100WT10P specifications

The Philips 100WT10P is a remarkable piece of technology that has been designed to enhance both workspace efficiency and user comfort. This innovative product caters to a variety of applications, merging state-of-the-art features with practicality to meet diverse needs in the modern office environment.

One of the standout features of the Philips 100WT10P is its impressive display quality. With Full HD resolution, it delivers crystal-clear images with vibrant colors and sharp contrasts, making it ideal for tasks that require attention to detail, such as graphic design, video editing, and data analysis. The screen size is optimized for various workspaces, ensuring that users can comfortably view content without strain.

The display also boasts advanced technologies such as UltraClear for superior picture quality. It utilizes advanced pixel technology to provide resolutions that cater to a range of users from casual to professional settings. Additionally, the Philips 100WT10P comes with an anti-glare coating, which reduces eye strain and allows for comfortable prolonged use.

Ergonomics is another key feature of the Philips 100WT10P. The monitor is fully adjustable, offering options for height, tilt, and swivel adjustments. This flexibility ensures that users can create a customized viewing experience, promoting better posture and reducing the risk of discomfort or injury during long work hours. The intuitive design makes it suitable for collaborative environments where multiple users may need to share the screen.

Connectivity is not overlooked in this model. The Philips 100WT10P includes multiple input options, including HDMI and DisplayPort, allowing for easy setup with various devices. This versatility contributes to a more seamless user experience, enabling easy transitions between laptops, desktops, and other media devices.

Moreover, the Philips 100WT10P incorporates efficient energy-saving technologies, making it an environmentally friendly option for conscientious consumers. With features such as PowerSensor, it can detect user presence and adjust power usage accordingly, contributing to reduced energy consumption when the monitor is not in use.

In summary, the Philips 100WT10P stands out as a premium choice for users looking for a high-quality, versatile monitor. Its impressive display capabilities, ergonomic design, flexible connectivity, and eco-friendly technologies make it an ideal companion for both professional scenarios and casual use. The combination of these characteristics ensures that the Philips 100WT10P delivers an unparalleled user experience, marrying functionality with cutting-edge technology.
Top Page Image Contents