|
| XDVD8183N OPERATION | |
|
|
|
|
|
|
| Troubleshooting |
|
|
| |
| General | ||
Problem | Cause |
| Action |
Unit will not turn on | Yellow wire not connected or incorrect voltage |
| Check connections for proper voltage (11~16VDC) |
(no power) | Red wire not connected or incorrect voltage |
|
|
|
|
|
|
| Black wire not connected |
| Check connection to ground |
|
|
|
|
| Fuse blown |
| Replace fuse |
|
|
|
|
Unit has power | Speaker wires not connected |
| Check connections at speakers |
(but no sound) | One or more speaker wires touching each |
| Insulate all bare speaker wires from each other and chassis |
|
| ||
| other or touching chassis ground |
| ground |
|
|
|
|
Unit blows fuse | Yellow or red wire touching chassis ground |
| Check for pinched wire |
|
|
|
|
| Speaker wires touching chassis ground |
| Check for pinched wire |
| Incorrect fuse rating |
| Use fuse with correct rating |
Unit has audio | Parking brake safety circuit not connected |
| Check connections at parking brake |
(but no video) | Parking brake not applied |
| Apply parking brake as described on page 33 |
|
|
|
|
No video display | Reverse circuit not connected |
| Check connections at reverse lamp |
(when in reverse) | Vehicle is not in reverse |
| Select reverse gear |
DVD does not start playback | Physical defect in media |
| Check media for scratches |
| Wrong region |
| Use discs labeled "Region 1" or "All" only. |
|
|
|
|
IR remote does not work | Dead battery |
| Replace battery |
|
|
|
|
Excessive skipping | Unit is not mounted correctly |
| Check mounting sleeve |
|
|
|
|
| Physical defect in media |
| Check media for scratches |
|
|
|
|
Bad Disc appears | Focus error or disc is in upside down |
| Press eject or RESET |
on display |
|
|
|
Incorrect Region Code | Region code error |
| Use only DVDs labeled “Region 1” or “All” only. |
appears on display |
|
|
|
Front panel will not | Front panel obstructed |
| Remove the obstacle and press OPEN to resume the monitor |
open/close |
|
| open/close sequence. |
|
|
|
|
66