Dual XDVD8281 owner manual Troubleshooting

		XDVD8281 OPERATION
		Troubleshooting
Problem	Cause	Action
Unit will not turn on	Yellow wire not connected or incorrect voltage	Check connections for proper voltage (11~16VDC)
(no power)	Red wire not connected or incorrect voltage
	Black wire not connected	Check connection to ground
	Fuse blown	Replace fuse
Unit has power	Speaker wires not connected	Check connections at speakers
(but no sound)	One or more speaker wires touching each	Insulate all bare speaker wires from each other and chassis
	other or touching chassis ground	ground
Unit blows fuse	Yellow or red wire touching chassis ground	Check for pinched wire
	Speaker wires touching chassis ground	Check for pinched wire
	Incorrect fuse rating	Use fuse with correct rating
Unit has audio	Parking brake safety circuit not connected	Check connections at parking brake
(but no video)	Parking brake not applied	Apply parking brake as described on page 33
No video display	Reverse circuit not connected	Check connections at reverse lamp
(when in reverse)	Vehicle is not in reverse	Select reverse gear
DVD does not start playback	Physical defect in media	Check media for scratches
	Wrong region	Use discs labeled "Region 1" or "All" only.
IR remote does not work	Dead battery	Replace battery
Excessive skipping	Unit is not mounted correctly	Check mounting sleeve
	Physical defect in media	Check media for scratches
Bad Disc appears	Focus error or disc is in upside down	Press eject or RESET
on display
Incorrect Region Code	Region code error	Use only DVDs labeled “Region 1” or “All” only.
appears on display
Front panel will not	Front panel obstructed	Remove the obstacle and press	to resume the monitor
open/close
		open/close sequence.

56