INSTALLATION continued
INPUT CONNECTIONS
Connect the front and rear RCA input jacks of the Amplifier to the outputs of the Source Unit (i.e., radio, cassette player or CD player). If line level output is not available, connect the speaker out- puts of the source unit to the Speaker Level input of the amplifier.
LEFT REAR(yel/blk) - | GROUND (black) |
|
|
|
|
| |
LEFT REAR(yellow) + |
|
|
|
LEFT FRONT(wht/blk) - | INPUT |
| FRONT |
|
| ||
LEFT FRONT(white) + | OUTPUT FRONT | REAR | MODE |
|
| HPF OFF LPF | |
| L |
|
|
SPKR | LEVEL |
| SENS |
| R |
|
|
|
| MIN | MAX |
RIGHT FRONT(blu/blk) -
RIGHT FRONT(blue) +
RIGHT REAR(grn/blk) -
RIGHT REAR(green) +
Figure 9: High/Low Impedance Inputs
Note: Connect the black ground wire to the source unit ground only if alternator noise is present.
Connect the Amplifier to the Speakers. Use thicker speaker wires (e.g. 8 - 10 gauge desirable) for these connections.
FOR STEREO MODE
Note: We recommend a total speaker load of 2, 4 or 8 ohms per channel
1.Connect the front left negative
2.Connect the front left positive ("+") speaker output of the amplifier to the positive terminal of the left speaker.
3.Connect the front right
4.Connect the front right ("+") speaker output of the amplifier to the positive terminal of the right speaker.
5.Repeat the same for the rear channel speaker connections.
|
| BRIDGE |
|
| |
+ | L | - | + | R | - |
|
|
|
|
| FRONT |
|
|
|
|
| REAR |
+ | L | - | + | R | - |
|
| BRIDGE |
|
|
|
Figure 10: Stereo Connection
COUSTIC.COM
FOR BRIDGED (MONO) MODE
Note: For bridged mono mode, we recommend a total load of 4 or 8 ohms.
1.Connect the front left positive ("+") speaker output of the amplifier to the positive input terminal of the speaker.
2.Connect the front right negative
3.Repeat the same for the rear channel.
4.Make sure that ALL RCAs (front and rear left/right) are plugged in, other wise bass response and output will suffer.
|
| BRIDGE |
|
| |
+ | L | - | + | R | - |
|
|
|
|
| FRONT |
|
|
|
|
| REAR |
+ | L | - | + | R | - |
|
| BRIDGE |
|
|
|
Figure 11: Bridged Single Woofer Connection
CAUTION: ANY DEVIATION FROM THE ABOVE SPEAKER CONNECTION MAY CAUSE SERIOUS DAMAGE TO THE AMPLIFIER AND/OR SPEAKERS. PLEASE DOUBLE CHECK THE CONNECTION BEFORE TURNING THE SYSTEM ON.
11