Safety First

SBP8A INSTALLATION

! CAUTION

The following instructions are designed to ensure safety during installation and use of the SBP8A. Failure to heed these instructions can result in injury or damage to the unit or vehicle.

The following installation instructions are intended to be used as a basic guideline. If you feel unsure about installing this speaker system yourself, Dual recommends acquiring the services of a professional car audio installation center.

Before installation, please review the following guidelines:

1.Be sure to carefully read and understand the instructions before attempting to install this product.

2.For safety, disconnect the battery negative terminal prior to beginning the installation.

3.If additional wiring is required, we recommend running all wires prior to mounting your bandpass enclosure in place.

4.To ensure reliable performance and minimize signal or power loss, use the highest quality connectors available.

5.Use caution before you drill or cut! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

6.Never run speaker wires underneath your vehicle. Running speaker wires inside the vehicle provides the best protection from exhaust, heat and environmental elements.

7.Avoid running wires over, near or through sharp-edged surfaces. We suggest you also use rubber grommets to protect any wires routed through metal, especially the firewall.

8.When running the speaker cable to the amplifier, avoid running it near sources of high current (i.e. wiring harnesses, battery cables).