General Operation

XDMA761

Faceplate Removal

Power On/Off

Source

Auxiliary Input

Volume

Display

Reset

Set the Clock

12/24-hour Clock

Press OPEN to open the face plate, then pull away from the right side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Press or any other button to turn the unit on. Press to turn the unit off.

Press SOURCE to enter the Source Menu, then press SOURCE or rotate the volume knob to select between Tuner, Disc, Aux Front, Aux Rear, USB, iPod and Pandora modes. Modes of operation are shown in the display.

The XDMA761 offers both front and rear auxiliary input ports for connecting an audio device, MP3 player, etc. Press SOURCE to select either the front or rear auxiliary input mode.

Adjust volume using volume knob (00-46).

Press DISP to toggle between ID3 tag and file/folder name for MP3/WMA files being played from CDs or USB devices.

Press RESET upon initial installation or if abnormal operation occurs. Reset button is located behind the front panel.

The unit will display the time on the LCD display. Clock settings are adjusted in the General setup menu (refer to page 8).

The clock will display 12-hour AM/PM time or 24-hour time (22:00). Frequency spacing is adjusted in the General setup menu (refer to page 8).