Bass Treble Balance Fader Equalizer Source Level

XDMA5280 OPERATION

General Operation

Audio

Bass

Treble

Balance

Fader

Equalizer

Source Volume Level

Press AUDIO momentarily to select between Bass, Treble, Balance, Fader, Equalizer and Source Volume Level.

BASS TREBLE BALANCE FADER EQUALIZER SOURCE LEVEL

Press AUDIO until BASS appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maximum).

Press AUDIO until TREBLE appears then rotate volume knob left/right to adjust ( -6 minimum / +6 maximum).

Press AUDIO until BAL appears then rotate volume knob left/right to adjust (BAL L12 - BAL R12).

BAL EVEN represents equal balance

Press AUDIO until FADER appears then rotate volume knob left/right to adjust (FADER F12 - FADER R12).

FAD EVEN represents equal fader

Press AUDIO until EQ appears then turn the volume knob to cycle through the following equalization curves: FLAT (default), POP, JAZZ, CLASSIC, BEAT, ROCK and USER. Any manual adjustment to the Bass or Treble settings are automatically saved as USER.

The source volume level control allows a gain adjustment for each audio source: AM, FM, CD, AUX, operation of iPod and USB. Set the source volume level for each mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO until SRC LEVEL appears. After one second, the current mode will appear on the display. Turn the volume knob to adjust the audio level of the current source (-6 minimum/+6 maximum).

Note: Only the current mode will be available for adjustment. To adjust another mode of operation, press SOURCE until the desired mode is selected, then set the source volume level for that mode.